Wardrobes photo (10)-735952

Published on September 6th, 2013 | by Jules Yap


Full Height, Wall-to-Wall Sliding Bypass Doors Using HASVIK Panels

image (3)-733561

Materials: Two sets of Ikea HASVIK Sliding Doors, Two sets of Everbilt 60 in. Sliding Door Sets from Home Depot, Vinyl Tubing, 2×4, Two 3″ long bolts and nylock nuts

Description: Needed sliding doors for full height, wall-to-wall closet with opening dimension of 116×95″ on a budget. Home Depot and Lowes did not carry off-the-shelf door panels that would fit that opening without going custom order. Two sets of 59×92 7/8″ HASVIK sliding doors was the most economical solution.

Also, two sets of Everbilt 60 inch sliding door sets were used. The door panels were slightly short so a 2×4 was used as a spacer to bring the track lower.

photo (10)-735952

None of the hardware that came with the Ikea doors were used. It would have taken too long to modify. Home Depot had sliding door hardware priced right.

To prevent the sliding doors from going all the way to the left or right, two bolts with Nylock nuts and vinyl tubing were installed through the tracks as a stop.

~ Phonkee, California

Fake old library
Rolling Expedit clothes display

The Author

Jules Yap

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

4 Responses to Full Height, Wall-to-Wall Sliding Bypass Doors Using HASVIK Panels

  1. Chae says:

    Martin… I want to do the same thing but the bottom rail is my main hang up too! Any hack you figured out? !!

  2. Audrey says:

    Does this have to be the Hasvik panels? I’d rather install one of the glass mounted panels but I’m not sure how that affects attaching the mounting hardware to the ikea door.

  3. Martin says:

    Another question: because the rail is on the inside and you use the Everbilt hardware, I suppose any size door would fit, thickness-wise? Would a door like Sekken be doable?

  4. Martin says:

    This is exactly what I’ve been looking for! I have the right height, about the right width, for 4 panels. What did you do for the bottom of the doors? I don’t want to drill a track in my floor, and that’s the main thing that’s been blocking me.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑
  • Recommended for you



    And we have the winners for the IKEA Hack & Idea of the Year 2014!
    Without further ado, I would like to announce the winners of the IKEA Hack of 2014 as…

  • And the winners are!
    Again, IKEAHackers readers have chosen. It was another fun year picking the best of the best.

  • FREE 20 Best IKEA Hacks ebook. Get it here!

  • View all: Posts in chronological order |
    Hacks of the Year | Ideas of the Year

    Support IKEAHackers! Click here to start your Amazon shopping!.