Featured

Published on June 17th, 2012 | by Jules IKEAHacker

6

Dual Phone Charging Station





Materials: RIBBA Frame (9×11), Micro-USB Y-splitter, foam sheet, felt sheet, dremel, tacky spray, epoxy glue.

Description:
With two phones having to charge at the same time I needed a way to use only one outlet to charge both and have less cables running aroung. I looked online for charging stations but found nothing really cheap and which would fit my living room decor. So I decided to make one for less than $10.

1. Take the RIBBA frame apart, discard the glass panel and mat. Rip the support “foot” from the back panel with pliers. You should now be left with the frame itself and the back panel.

2. Since the back panel is slightly smaller than the frame it was made bigger by wrapping it with a foam sheet first, then wrapped with a felt sheet. Everything glued with tacky spray. Both sheets provide cushioning and a scratch-free surface for the phones.

3. Drill a rectangular hole in the frame to fit the female end of the Y-splitter. Measure, drill and use a file for the corners. Slide the Y-Splitter in the hole. If loose you can glue it in place.

4. Glue the back panel onto the frame. Voila!

~ Phong, Irvine, CA

More hacks on IKEAHackers.net
VIKA does a handstand
Eames’ esque Storage unit hack

The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

6 Responses to Dual Phone Charging Station

  1. Anonymous says:

    Bear in mind that if you divide the power by 2, you will multiply by the same number the time it takes to charge.

    And maybe 0.25 Amps (USB gives around 0.5 Amps) it’s too low and could damage the battery. I suggest to use a charger that supplies 1 Amp or 1.5 Amps, more or less.

    • Anonymous says:

      If don’t even know if any Micro USB chargers will be 0.5amps. Most are 1A, and iphone or ipad chargers are near 2A now.

  2. Anonymous says:

    all of this is to hide the splitter?

  3. Guus says:

    Won’t one phone charge the other one if the main charger cable is unplugged or in a power outage? This might be unhealthy for the batteries.

  4. Stan says:

    What a great idea. I spent $12 on something like this that was for only one phone and yours looks much better.

  5. Robert says:

    Dude, so awesome! I’m actually gonna try this one it’s so simple.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • Null
    Overlays
    Null
    CoverCouch
    Null

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com