Miscellaneous

Published on October 30th, 2011 | by Jules IKEAHacker

5

Charging Station for $6+





Materials: SOLBRAND, NEDDA, cardboard, glue gun, scissors/razor blade, drill and drill bit, (Optional: KAPPLA surge protector)

Description: It was time to make a charging station (we have 3 cell phones and quite a few ipods…. don’t ask :)

Step 1: Using the larger serving bowl from the SOLBRAND set, place the bowl upside down and trace the perimeter on the cardboard. To compensate for the slope of inside the bowl, cut the traced cardboard a little more than ¼ inch inside what you traced (you might need to trim more later).

Step 2: I created a sturdy surface for the cardboard to sit on using some wood I had lying around. I hot glued them together and to the bottom of the bowl. You can use anything stackable to create a level surface for the cardboard to sit on. You could also glue things on the walls of the bowl to create a sitting surface. (Optional: if you want to have all your chargers in the bowl, make sure to leave space for them along with the KAPPLA surge protector).

Step 3: Trace the trimmed cardboard piece onto the NEDDA chair pad (I purchased the ‘no design’ version) and trim to fit. Once you are satisfied with the overall fit, make the area for the charger cords to fit through. I made a slit in the middle. On the cardboard side I cut out ½ inch by 1.5 inches.

Step 4: Hot glue the trimmed NEDDA to your cardboard. Glue a nice amount around your cardboard slot.

Step 5: I drilled a 1-1/4 inch hole on the side of the bowl for the cords to come out. (Optional: If you don’t use the KAPPLA surge protector in the bowl, run your chargers through the hole and use a RABALDER cable cover for a cleaner look.

I’d love to see various versions!

~ Jon T., D.C. metro area

More hacks on IKEAHackers.net
Growing up table
Living Room Wall System

The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

5 Responses to Charging Station for $6+

  1. woolywoman says:

    Nice! I made something similar, using a cardboard storage box. But yours looks better!

  2. Anonymous says:

    Really nice idea! Looks pretty too. Since all of the cables appear to attach towards the bottom of each device though, how about relocating the hole for the cables to come out of towards one of the edges? Then all the devices can fit better.

  3. Anonymous says:

    they sell it at almost the same price…

  4. Anonymous says:

    Looks awesome, congrats! You also got boosted on Lifehacker!

    http://lifehacker.com/5855145/make-an-affordable-good+looking-charging-station-for-less-than-10?tag=diy

    Shame the comments are so bad – I love reading Lifehacker but their commenters are generally horrible people.

  5. Anonymous says:

    Thanks for the idea. I just finished making one using my sons shoe box. It charges the my mobile and iphone and his psp. After finishing I can close the shoe box with its lid and stores neatly.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • Null
    Overlays
    Null
    Null
    CoverCouch
    Null

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com