Published on September 2nd, 2011 | by Jules IKEAHacker4
RUSCH wall clock mod
Materials: small screwdriver, double sided tape
Description: This easy modification easily customises your cheap clock. It also has the added benefit of making the ticking lower volume.
First you need to remove the front plastic cover by carefully prying it with the small screwdriver, there are 3 small tabs to gently pop out.
Once the front is off remove the second hand by pulling. I then used cutters to snip it short, you could easily just bend and break it off.
Now attach your new graphic with double sided tape making sure it is centered well.
~ Paul, UK