Published on August 16th, 2011 | by Jules IKEAHacker8
Unique shoe storage/display solution
Materials: Ekby Laiva shelves, Circular Saw, drill, screws and wood glue
The shelving was assembled on the back of a second hallway door which we don’t use, although it does still open if required.
Built from the bottom up, initially a cut shelf piece is screwed into the wood flat to provide the first ‘bracket’ backing. Then the first shelf is attached on top of this piece using plenty of wood glue and two screws through it downwards (the holes for which were pre-drilled to prevent splitting). The next ‘bracket’ is then screwed into the door directly above this shelf which helps sandwich it in place. Repeat until done!
This project took me all afternoon, definitely longer than expected. But the results was pretty satisfying and cost just $30.