Dining

Published on February 27th, 2011 | by Jules IKEAHacker

7

Lack Bistro Table





Materials: 2x Lack side tables, 1x Lack coffee table, Loctite construction adhesive, Polycrylic

Description: We had a tiny “breakfast nook” in our newly remodeled (Ikea Adel MB!) kitchen and wanted an affordable way to add a small table for two. The space available was *very* narrow (we had to be able to open the pantry and access the window/trash can), and we wanted something pub-height so we could use the same stools that are at our breakfast bar. I had been wanting to hack-a-lack for a while, and when I saw the $19.99 coffee table, I was sold!

Step 1: Purchase 2 Lack side tables, 1 Lack coffee table, construction adhesive, and poly (for the table top, we used water-based). Cost: approximately $40-45.

Step 2: Set one side table top on the floor, shiny (paint) side up. Glue four legs to the corners of the top surface. It can be tricky to get these square and/or level, so be aware you may need to adjust a bit as the adhesive sets. Try to wait until almost completely dry before proceeding.

Step 3: Glue the tops of the four ‘first-tier’ legs to the bottom (not finished side) of the second side-table top. Weight and wait for it to dry.

Step 4: Repeat step 1 on the top of your new “box” to create the second-tier legs.

Step 5: Measure carefully on the coffee table top to center the table base/legs so overhang is the same on both ends. Glue the tops of the second-tier legs to the bottom of the coffee table top, add weight, and wait for it to dry completely.

Step 6: Apply 2-3 coats of poly to the table top. We only did this on the very top (the coffee-table piece), since that’s where beverages, etc would be set, but you could apply it to the entire structure if you were ambitious. Use very very fine sandpaper between coats to remove bubbles.

Step 7: Voila! Bistro table for 2 that fits in a very narrow space. We added felt pads on the corners of the bottom layer to protect the floor.

Leftovers for other hacks: coffee table shelf (same size as top but thinner), set of 4 Lack legs.

~ Blair, Knoxville, TN

More hacks on IKEAHackers.net
Modern dining room lightning
DIY Slide Projector

The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

7 Responses to Lack Bistro Table

  1. Jenna Taylor says:

    Such a simple idea! Perfect hack :)

  2. Anonymous says:

    Love this! Great for a small space.

  3. Anonymous says:

    Very good idea! What is ‘poly’ in French ? Thx :-)

  4. JC says:

    Polyurethane
    http://www.ehow.com/i/#article_2057173

    I wonder if there’s a glass top for something (malm?) that might work here in place of varnishing the top.

  5. halleysuzy says:

    My boyfriend and I made this table this past weekend. It looks perfect and was exactly what I was looking for. Instead of using glue, we drilled screws into the legs to make sure it was extra sturdy. Thanks for the idea!

  6. john ked says:

    how can i order this?

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • CoverCouch
    Null
    Null
    Null
    Overlays

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com