Special jar label for IKEA KORKEN

ContributorNovember 24, 2017

I made this IKEA KORKEN jar label. I had a lot of different varieties of chilli sauce to label, so I came up with this design. It's customisable so you c...

3D0 Comments 7

3D printed shoulder pads for the IKEA BUMERANG hanger

3DprintTechDesignJanuary 30, 2017

Want to support heavy coats and sensitive clothes on your budget IKEA hangers? Look no further. I got you covered (as long as you have a 3D-printer or access to...

3DWardrobes0 Comments 0

3D Printable IKEA Tape Measure

ContributorJanuary 2, 2017

IKEA items used: Ikea Tape Measure Turn your free IKEA measuring tape into an IKEA tape measure thanks to 3D printing. Inches on one side, centimete...

3D1 Comment 0

A 3D Printer framework never looked so good

ContributorDecember 20, 2016

The field of 3D printing has gone through quite a bit of development but sadly, the 3D Printer DIY framework kits weren't keeping up. Wayne's project of usi...

3D1 Comment 0

Ikea Knagglig wooden box easy link clip

Jules YapJune 29, 2016

  IKEA items used: Knagglig wooden storage box I designed an easy to use little 3D printed clip to hold two or more Knagglig wooden boxes...

3D3 Comments 0

The Omega Lamp, a nice & easy 3D printed lamp

Jules YapMay 9, 2016

IKEA items used: The IKEA Brån glass base First you'll have to get the Ikea Brån glass base available here. Then, you have to download the 3D models...

3D1 Comment 0

Cool 3D printed lampshade for HEMMA cord set

ContributorApril 7, 2016

IKEA items used: HEMMA cord set My colleague Matus Danko created really cool lampshade in less than a weekend: How he did it: 1. Designing and 3D M...

3DCeilingLighting1 Comment 0

Print It Yourself (PIY): IKEA Lack end-cap

borudAugust 19, 2015

If you want to shorten the table leg of an IKEA Lack table, you might want to put an end-cap on the leg after you have sawed it off. The leg is hollow so it wil...

3D0 Comments 0

IKEA “KOPPLA” Hack – get your cables of the floor

PelleNovember 6, 2014

I got tired of getting tangled in the cables under my working desk. Every accessory has there own power cable and the power strip outlets are to few, or as for ...

3DHACKS22 Comments 1

Manly Leirvik

JulesSeptember 26, 2014

Materials: LEIRVIK Bed The LEIRVIK Bed comes with a beautiful but quite feminine top part. As gorgeous as it is, some times you might get tired of it, es...

3DBedroomBeds11 Comments 0

3D printed bracket for smaller bottles in Hutten wine rack

JulesAugust 15, 2014

Materials: HUTTEN wine rack I had some smaller bottles that would fall through the gaps, so I decided to make a fix for it. A recently aquired 3D-pr...

3DHACKS1 Comment 0

IKEA GoPro STAM Time-lapse

maxvoJune 23, 2014

Today we'll be featuring a very special IKEA hack: one for GoPro owners. This hack will turn your STAM kitchen timer into a GoPro mount which lets you make some...

3D1 Comment 0

IKEA Spare Parts

maxvoMay 22, 2014

Sometimes hardware parts break or get lost and it is not always easy to come across new ones. Hafners Buero (link no longer available) took the time to model so...

3D3 Comments 0

ORDNING Wall Mount

maxvoMay 15, 2014

Cutlery Caddies can keep your kitchen clutter free, but sometimes you simply don't have the space to put them anywhere. Well look no further, because there is a...

3D3 Comments 0

EXPEDIT Side Table

maxvoMay 8, 2014

EXPEDIT parts are becoming rare these days, but if you still have a version with glass inserts, this might be just the hack for you. Materials 1 x EXP...

3D0 Comments 0