I found this bar desk on Pinterest but haven’t been able to find the original instructions. Any ideas how to make this?
Thanks for any help.
That’s a sleek bar desk.
Here’s how I would hack a bar desk
Place two 12 x 14 3/4 x 40″ SEKTION wall cabinets back to back. One cabinet opens to the left and the other, to the right like your inspiration photo. The MELLTORP desk is a good fit (29 1/2″) with the length of the two SEKTION cabinets (a little under 29 inches) when they are positioned back to back.
All you need to do is to secure the cabinet frames to each other. Then, cover the front with wood grain contact paper or a piece of plywood if you prefer a more realistic finish.
Lastly, attach the worktop to the bottom piece with L brackets or with screws, drilling in from the cabinet up to the worktop. The MELLTORP may be hollow in some parts, so do install them where the screws can anchor in.
For a longer version
Depending on how long your worktop is, adjust the distance between each cabinet to match. The ends of the cabinet should be flush with the edge of the tabletop.
Then get two pieces of plywood cut to the size. Cover the front and back of the cabinets, including the space in between. This will secure the two cabinets to each other and create a single unit.
Then attach the worktop to the bottom piece as per instructions above.
If your find the many dowel holes unsightly, cover them with these VARIERA cover plates.
Finally, but very importantly, I would attach the desk / bar to the wall with appropriate fixings to minimise the risk of tipping. Do remember to drill holes for wiring etc. before attaching the unit to the wall.
Hacking may compromise the structural integrity of the item, so please be aware of the risks involved before modifying or altering any IKEA product. Alterations and modifications will also void any warranties or return policies you may have received from IKEA. IKEAhackers.net is not liable for any product failure, injury or damage resulting from the application of suggestions, ideas and hacks featured on this site.