Materials: Solvinden Lightchain
Description: What you need:
– Pair of Scissors
– pliable Wire
– Coloured plastic-foil (we used plastic ring binder-sheets)
First cut out leaf shaped parts out of the foil (a stencil might be handy).
Put two holes into the leafs side by side. Slide at least 5 leafs on the wire. We used 5 larger ones and about 4 smaller ones.
Repeat that until you have all your lights covered.
We made an extra sling around each light for the longer “pistils” inside each blossom.
~ Alex & Lena, Germany