A password will be e-mailed to you.

Materials: Fullen

Description: The Fullen sink base cabinet is very low compared with the height of my sink, so I thought why not put two on top of each other?

I cut of the side panels on the reduced Fullen so they would fit under the normal Fullen. I drilled new holes for the assembly pins and put it together as normal. This part will be without doors so I left out the part with the hinges.

Then I cut a new hole for the drain pipe in the top panel of the normal Fullen with a jigsaw and put the shortened Fullen version on top and fixed it with some small screws.

I followed the rest of the instructions and fitted the combo with doors, back panels and legs.

~ Jens Kløve, Copenhagen