A password will be e-mailed to you.


Materials:
LACK table, spotlights, switch, cable, idea 🙂

Description: We wanted a table next to our bed but at the same time we didn’t like the lamp standing on the table and we wanted to have a flower on it as well.

Steps:
1. Drill two holes in the size of the spotlights. Be careful the table is paper inside so you need a bracket to screw underneath in order to hold the spotlights.
2. The pot should be conical and the diameter of the hole should be smaller than the top of the pot. Otherwise it will fall through the hole.
3. We used a double switch so the 2 lights can be switched independently but it is not mandatory.

~ Kriszta & Geri, Netherlands