A password will be e-mailed to you.
IKEA glass enclosure for reptiles

Materials: Expedit, Tundra, Besta

Description:
The Idea was to build a cheap but tasteful enclosure for reptiles.

It all started when I was working the morning shift in the Ikea of Groningen (NL). I had to drive in the pallets of Tundra laminated floors. On top of the pile was a complete sheet of Tundra, for protection. I knew I could use it for something, so I kept it.

Then I looked for a closet with the right dimensions to keep some kind of reptile species and thought of the Expedit series.

IKEA glass enclosure for lizards
IKEA glass enclosure for reptiles
IKEA glass enclosure for reptiles

Eventually I bought 2 of the small sized Expedit (80x80cm) closets. I drilled extra holes in the all of the top ends of the side plates and placed them with the little wooden plugs on top of each other.

I added the top of one and the lowest part of the inside. Then I had to cut the Tundra sheet the right size and glued it to the back of the Expedit. It had to cut one horizontal shelf in 2 pieces for the down and upper front. Here I cut 2 holes out for ventilation and placed 2 ventilation shafts.

On top of those I placed double U shaped profiles for the glass doors and gave them a nice finish by adding 2 aluminium strips. At last I installed 3 light fittings and put in the glass from a Besta series.

Next up, finding the right lizard!
(no snakes allow by order of the girlfriend ;))

~ Aki Ook, The Netherlands