IKEA Expedit DJ Booth for LoungeBar

20140408_161946

Materials: Capita Bracket and a Lack wall shelf, Capita Leg, Expedit 79×79 shelving unit (now it’s called Kallax)

I got this job, to make a DJ booth for a coffee and wine bar. It had to be a bit of a loungy look, so I decided to do something with LED strips, and light bulbs. The first thing I did, was to check this website, because I already knew that everyone uses the Expedit Shelving unit for a DJ Booth.

Because its perfect in height (with the Capita Legs). I chose for the smallest Shelving unit, because the DJ there only uses a DJ Controller and a Laptop. Okay here we go.

1. Assemble the Expedit (79cm x 79cm) as per the included instructions.

2. Assemble the 4 Capita Legs (16 cm height) on each corner of the Expedit Shelf

3. Assemble the 2 Capita Bracket on the top of the Expedit, IMPORTANT: Measure first if the size of Lack shelf fits with the Capita Bracket!

IMG-20140401-WA0005

20140401_130149

20140401_124446

4. Assemble the Lack Wall Shelf, on top of the Capita Bracket.

Okay now your DJ booth is done! What you do with it now is your choice. I chose to add some LED strips (bought from a Chinese wholesale webstore) on the bottom of the Expedit bookcase.

20140401_144713 20140402_161734 20140402_181212

I also added a plate of glass in front of the DJ Booth. Maybe when I deliver the booth, I place some bottles of wine and coffee cups in it, to give it a nice look!

note: Because the LACK is a wall shelf, it has an ugly side of the plate. I solved this with a plastic strip glued at it.