Christmas Nativity with 2 RIBBA FRAMES and 3,5 cm statues

15

You need: 2 RIBBA FRAMES (400.783.32), cutter, polystyrene, battery powered LED lights, sawdust, gypsum plaster, acrylic colors, brush, sky pictures (search and download from internet), hinges, locks

01. remove glass from one Ribba frame and a back panel from the other one.

01

02. cut 2 pieces for making different mountains but with a central place of the same height

02

03. use 3cm and 2cm depth polystyrene and battery powered LED lights

03

04. fix LED lights chain

04

05 build a stable and print the sky with a comet (search it on the web) on a professional Kodak paper

05

06. mix sawdust and gypsum plaster in 9:1 ratio (almost) and put the sawdust and gypsum plaster on the mountains and on the stable

06

07. check if all the nativity statues are o.k. on the base

07

08. colour the base with brown acrylic color diluted with water in 1:20 ratio

08

09: cut a plastic piece to realize the back of the stable

09

10. use 4-5 different browns, white, 2 different yellow and dark green

10

11-12: cut the pack panel and the sky kodak paper for switching the lights from the back side of the frame

11 12

13-14: fit hinges and locks

13 14

15-16:… et voilà…

15 16

MERRY CHRISTMAS

Gerardo P.
Foggia, Italy