Accessories

Published on June 5th, 2013 | by IH guest

0

Steampunk-style Borrby display case





Materials: Borrby lantern, some wood and various odds and ends

Description: From another project I was left with an old and very beat-up mechanical clockwork. Because I like seeing a clockwork at work, I started looking for something that might function as a display case. The smaller Borrby lantern is inexpensive and seemed well-suited to my purpose.

Note: the galvanized version of the Borrby is constructed differently and I don’t think it would work for this hack.

I bought two, because I couldn’t find a single one without scratches on the glass (Hey Ikea, Borrbys are not adequately packed, they’re just placed together in a box without any separation or protection between them). I ended up using 5 glass panels; one for the top as well.

First I removed all the glass panels. Then I pried off the top section of the lantern and sawed off the 4 supports flush with the bottom. I turned the lantern upside-down (so the top became the bottom). I fastened the top (now bottom) to a leftover piece of oak board – because the metal is thin and became a little deformed, I used brass L-brackets to clamp the metal down to the board (the brass echoes the clockwork metal). I was intending to put brass corners around the top too, but that didn’t look like it would work out when I got to it (the screws would have ended up going through the glass).

The vent holes were covered up with leftover pieces of a LOBBO lampshade. Brass plate would have been nicer but I didn’t find any.

The top cover is made of two overlapping L-shaped pieces sawn from what was originally the bottom of the lantern. These I glued together and re-painted black. The top is held in place by double-sided construction tape, In case I need to take it apart again.

I cut a glass panel to size for the top. I’m not very good at cutting glass, so starting from the panels of another Borrby limited the number of cuts I needed to make. Also, 3 chances to get it right…

My spare lantern is now missing its back glass panel, I intend to put a reflecting piece of metal in its place (perhaps cut from a cookies box) and turn it into a semi-directional lantern.

~ Eli, Belgium

Faktum Storage Bed
(Plant) Pot Lights
We will be moving. Don’t miss any hacks.
Be the first to know
IKEAhackers will be moving. Be the first to know of the new domain when it is ready. Enter your details and sign up now.


The Author

I am Jules' little helper on IKEAHackers. Helping to upload posts, moderate comments, do minor tweaks here and there.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑