Uncategorized

Published on May 21st, 2013 | by IH guest

1

LACK Side Table – Night Table





Materials: LACK Side Tables; Wood blocks, wood glue, nailer

Description: I was on a tight budget. After trying to find suitable night tables in second hand stores and online, I came across ikeahackers.net. I was impressed with all the ideas. I went to IKEA and found 4 LACK side tables on sale at $4.99 each. I bought the basic white.

The first step was to assemble 2 tables, to serve as the base of the 2 nightstands.

The second step was to cut down the legs of the second set of tables. Then I assembled the tables. They would serve as the top of the finished tables. I cut them so the overall height of the finished product would be 27″.

Once I cut the legs, I discovered they were hollow. This was my first IKEA purchase, so I was unfamiliar with their product. No worries. I cut small blocks from a 2″x4″ plank, and glued and air nailed them to the corners of the base tables. Then the cut legs would slide over the blocks. I then fastened the legs using the air nailer to the blocks.

~ Sue Allen

Full wall Besta media unit
Cooking with Rast!

The Author

I am Jules' little helper on IKEAHackers. Helping to upload posts, moderate comments, do minor tweaks here and there.

One Response to LACK Side Table – Night Table

  1. Ewelina says:

    I did the same table as you, your post helps me a lot. Thank You! :)

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • CoverCouch
    Overlays
    Null
    Null
    Null

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com