Published on May 11th, 2013 | by Jules Yap


Full BILLY wall

Materials: BILLY

Description: From IKEA:
5 large BILLY bookcases (80x28x202 cm) and 10 BILLY top bookcases (80x28x35 cm).

Removed every second vertical wall-side and drilled out holes to fit shelves/screws/etc on both sides.
Put together the 5 big bookcases first, placed wires on the back before mounting it to the wall. Once stable the smaller top cases were placed on top. The leftover wall-sides were used to fill the gaps around the bookcases and wall/ceiling.

Once done the light was added, vertical room “room separators” were cut to fit and a floor panel was added at the bottom.

~ Anders, Copenhagen, Denmark

More hacks on

Riveting Ply PELLO Recliner
Modern Speaker Stands for Under $50

The Author

Jules Yap

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

7 Responses to Full BILLY wall

  1. Marina says:

    Could you write a little bit more about the realization?
    I’m a neophyte about ikeahackers solution!

  2. Anonymous says:

    Very nice job ! Look great !

    But what’s the table ?

  3. Anonymous says:

    The work-man are so beautiful!

  4. Anonymous says:


  5. Anonymous says:

    Very nice! good job =)

    What table is that?

    Thx! =)

  6. Alexis Marlons says:

    These are very organized yet stylish. Must try to have this one in my little office at home.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑