Published on May 6th, 2013 | by Jules Yap


4 Bennos, not quite enough space

Materials: Benno, router, drill, wood dowels

Description: We recently moved, and the spot we wanted to put our 4 Benno towers to put our DVD’s on was about an inch too small.

After coming up with many terrible ideas, trying to figure out a different place to put the shelves, and checking this site for ideas, I decided to just take two of the shelves, and have them share one of the side panels.

All I had to do was flip over one of the panels & using a router, made a groove for the backing. Then I drilled through the peg holes so that I can put shelf pegs on both sides. (That was the tough part, as the board splintered when the drill punched through.)

Then I drilled some holes to add wooden dowels & wood glue to keep it together and stable.

~ James, Southern California

More hacks on
Stand up Billy bureau or mini bar
Low Cost Home Theater Speaker Stand

The Author

Jules Yap

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

7 Responses to 4 Bennos, not quite enough space

  1. Claudia says:

    I have done something similar with the Benno system, to create more space. I’ll see if I can upload my hack as well…

  2. wkrick says:

    How do the top/bottom pieces attach to the shared center piece?

    Is that what the wooden dowels and wood glue comment is referring to?

  3. Jordan says:

    I was cutting some ikea stuff and the venir kept splintering. I cut one with the blue film still on it and it didn’t splinter. So the next time I just put some transparent packing tape over it and it didn’t splinter any more. yay!

  4. Anonymous says:

    If you put a piece of wood, e.g. a board, under the place you want to drill through, the veneer will not splinter and the hole will be nice and clean.

  5. Anonymous says:

    Smart idea. I like the benno’s and need at least 3 for my place but hate how separate units have the space between them. I forsee combining together however many I get this way.

    And as far as splintering goes, use tape to help reduce it when you drill and cut.

    • Anonymous says:

      Or lay the board you want to drill flat on another board that will be damaged and take many random holes (I think it’s called a martyr).

  6. Anonymous says:

    Nice, neat hack

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑
  • Recommended for you



    And we have the winners for the IKEA Hack & Idea of the Year 2014!
    Without further ado, I would like to announce the winners of the IKEA Hack of 2014 as…

  • And the winners are!
    Again, IKEAHackers readers have chosen. It was another fun year picking the best of the best.

  • FREE 20 Best IKEA Hacks ebook. Get it here!

  • View all: Posts in chronological order |
    Hacks of the Year | Ideas of the Year

    Support IKEAHackers! Click here to start your Amazon shopping!.