Published on April 4th, 2013 | by Jules IKEAHacker9
Lifting up IKEA table for bed to fit with other beds
Materials: MALM Occasional table, wood, steel plates, saw and screwdriver
Description: We liked MALM Occasional table in oak, which went with our bedroom, but our non IKEA bed was to high.
Made an extension which I think look pretty and work well.
Moved the wheels from the table to a piece of wood by cutting out enough space for them.
Added extension to this piece fitting into the place where the wheels had been.
Got the wood covered by steel plates, folded by a local metalworker.
Could be done in copper or aluminium yourself, which is softer than steel.
~ Frode, Norway