Hackers Help

Published on April 22nd, 2013 | by Jules Yap


Hacker help: How to stack 2 Lillangen together?

Photo: IKEA.com

Materials: LILLÅNGEN wall cabinet

Description: I have a small entryway, I was thinking about placing 2 LILLÅNGEN wall cabinets one on top of the other (possibly placing the top one upside down as a sort of desk) SOMEHOW, adding some feet/leg frames.

The point is how to stick them together… as I am totally unable to drill things to the walls. Any ideas?

~ chiara, Milan, Italy.

More hacks on IKEAHackers.net
Risor 2.0
Big Besta Built-ins

The Author

Jules Yap

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

5 Responses to Hacker help: How to stack 2 Lillangen together?

  1. I have put two Lillången 40cm cabinets together, though side-by-side, not on top of each other.
    I placed them side by side, and drilled a hole through the connecting side walls of the cabinets. I then used connecting screws to hold it together. (I then placed the two cabinets on top of Lillången legs with a fitted Prägel plate on top)

  2. Patrick says:

    How about using the connecting screws one uses to hold two PAX wardrobes together?

  3. Michela says:

    Per le gambe potresti usare la base LILLÅNGEN inox, che si fissa con le viti, o qualsiasi altra gamba per mobili. Per unire i due pensili puoi semplicemente usare le giunzioni per mobili che si trovano nei negozi di bricolage (http://www.colfert.com/ita/dettaglio-prodotto-351.asp?codP=3378), ce ne sono di vari tipi. Basta allineare i pensili, bloccarli con dei morsetti e forare.
    Però ricordati di fare attenzione, se non sono fissati al muro, aprendo le ante potrebbero caderti addosso.

  4. Anonymous says:

    A better method than straps is to use Type G hex-drive cabinet connecting bolts and cap nuts. Various sizes and lengths can be purchased at your big box home improvement store. If needed, the bolts can be shortened with a hacksaw, file or grinder.

    Before assembling the cabinets, align and clamp the top of the lower cabinet to the bottom of the upper cabinet and drill holes near each one of the four corners. Remove clamps after holes are drilled. Assemble each cabinet and then bolt the upper cabinet to the lower cabinet.

    Examples of cabinet connecting bolts and nuts at Home Depot:



  5. Anonymous says:

    You can get brackets at any hardware store, usually only a few dollars. Either a flat one if they’re going directly on top of each other or an “L” bracket if you want to try to lay one flat.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑
  • Recommended for you

  • FREE 20 Best IKEA Hacks ebook. Get it here!



    See who won the IKEA Hack & Idea of the Year 2015!
    Voting has ended and we have winners. The The IKEA Idea of 2015 goes to …

  • And we have the winners for the IKEA Hack & Idea of the Year 2014!
    Without further ado, I would like to announce the winners of the IKEA Hack of 2014 as…

  • And the winners are!
    Again, IKEAHackers readers have chosen. It was another fun year picking the best of the best.

  • View all: Posts in chronological order |
    Hacks of the Year | Ideas of the Year

    Support IKEAHackers! Click here to start your Amazon shopping!.