Friday, January 11, 2013
Ribba tablet/phone stand
Materials: RIBBA, cable canal, saw, drill, sandpaper, paint
Description: I needed something to stand my tablet on while using it for controlling my music at home. We recently moved to a new apartment and had a bunch of spare RIBBA picture ledges lying around.
So I ended up sawing a piece of shelf to the width I wanted. Then I used the already present hole and drilled it with an 8 mm drill, just enough room for one of Apples lightning connectors to pass through. This is not really needed but it helps the charging cable not slip away when not in use.
I chose to glue on the top lid of a spare piece of cable canal as an inner step for standing the tablet in an almost upright position. But you could skip this part if you want. After a bit of sanding and painting the sides you're done. Dead simple!
This would work in smaller pieces for say an iPhone bed-side stand as well.
~ Peter, Sweden