DON'T MISS A HACK. CONNECT WITH ME.

Friday, December 07, 2012

Lack sofa table platform bed


Materials: LACK sofa table, 5 2x4's, plywood, screwgun

Description: Screw a 2x4 to the wall at the same height as top of Lack table. connect 4-5 2x4's to that board and Lack table with screws. Cut plywood to fit your size bed. Also can use coffee table, this bed sits very high.

~ cotton spangler, Studio City
Posted by at
Labels: , ,

5 comments:

  1. Cotton,

    What did you use to re-enforce the sofa table? Ikea says its maximum load is 44lb (20kg).

    ReplyDelete

  2. Doesn't look very...love-proof...

    ReplyDelete

  3. This is the best one yet for my bed needs, but I'm not quite sure how it's attached to the wall and held up - or, as everybody else is saying, how sturdy it'd be for...couples.

    ReplyDelete

  4. If the 2x4's are connected to the wall studs with, say, 4" screws there will be no "couple" issues with this design. The wall will fall down before the bed.

    ReplyDelete

  5. Use 2 Lacks then, but I'd use Expedits so there would be storage.

    ReplyDelete

Everyone is free to comment but IKEAHackers.net reserves the right to remove comments that do not contribute constructively to the discussion, contain profanity, personal attacks or seek to promote a personal or unrelated business. SPAM will be deleted.

If you have a Blogger profile, you can click on the SUBSCRIBE BY EMAIL link that will show up below and receive all follow up comments on the hack via email.

Don't have a Blogger profile? Create one for free here so you won't have to be be listed as "anonymous".

Subscribe to: Post Comments (Atom)