Published on December 13th, 2012 | by Jules Yap5
Expedit slim shift version
Materials: Expedit 2×2 shelving unit
Description: Ever thought that the Expedit series took a bit too much space? My very small hallway had no space for a full version of the Expedit as the front door couldn’t open… This is how I did it:
First I marked up the cut plane on the assembled Expedit 2×2, the plane is a bit shifted in this case, as the shoes to the left are bigger than the shoes at the right
Then it took it apart and cut the different pieces with a fine hand saw.
I then reused the cut-off-piece as the reinforcement at the front of the shelves as they had the precut holes I needed to reassemble it. I cut a small piece off the reinforcement to make room for the replacing front.
I drilled new holes for the reassembly and put everything back together.
~ Jens Kløve, Copenhagen