Published on November 29th, 2012 | by Jules IKEAHacker9
Ribba + Oppdal
Materials: Ribba LED picture light, Oppdal bedframe
Description: At first I cut off the lower back Part of the Ribba LED picture light (photo below, upper left picture). I also cut off the part between the drill holes of it, so that I can put the cables in between (photo below, upper right pic).
Next I removed the front part of the headstand of the bed and drilled the Ribbas in. When put together there is only a small gap between the large front and the upper part, so one could also cut a groove into it to make everything flush.
Other items on the picture:
Ribba, Oppdal, Fejka, Rutbo, Aläng
Gäspa, MYSA VETE 240×220,2x Gosa Pinje, 2x Gosa Raps
~ Ralf B, Cologne Germany