DON'T MISS A HACK. CONNECT WITH ME.

Tuesday, November 27, 2012

Pimp your MOPPE: Corpuslight


Materials: MOPPE

Description: My old MOPPEs corpus is especially good to build a standard lamp from it.

Step-by-step manual

1. First print a stencil for the light-holes.

2. Then drill out the holes. Take a drill with a small diameter.

3. Now you have to choose your favorite color for your Corpuslight. I overcoated the inside with white varnish (don't forget to tape the edges) and the outside with wood-colored (wenge) varnish.



4. In the next step install a bulb-holder inside the MOPPE (I pulled a nylon-twine through two holes an the bulb-holder). Be careful, don't take too strong bulbs, not more than 25 watt. I assume no liability.

5. Finally bond transparent paper over the two big slits (I fixed it with tape). You can bend the transparent paper easily. In this way you avoid wrinkles and the light gets a soft character. Its also possible to use colored transparent paper or (colored) foil.

See more of the Moppe Corpuslight.

~ Isabelle Koch, Germany
Posted by at
Labels: , ,

1 comment:

  1. this is awesome,quite sure the cost is quite cheap!

    ReplyDelete

Everyone is free to comment but IKEAHackers.net reserves the right to remove comments that do not contribute constructively to the discussion, contain profanity, personal attacks or seek to promote a personal or unrelated business. SPAM will be deleted.

If you have a Blogger profile, you can click on the SUBSCRIBE BY EMAIL link that will show up below and receive all follow up comments on the hack via email.

Don't have a Blogger profile? Create one for free here so you won't have to be be listed as "anonymous".

Subscribe to: Post Comments (Atom)