Bedroom

Published on November 23rd, 2012 | by Jules IKEAHacker

38

EXPEDIT Storage Bed





Materials: EXPEDIT Shelving unit, 4 Plywood, 4X4, 5′ Hinge, Black King size sheets

Description: As we live in a condo we really needed more storage space so after visiting this site (thanks a lot for the inspiration) I decided to build my own bed, for a Queen size mattress using 3 Expedit Shelving units and the other materials previously listed.

Sadly I only have pictures of the finished product.

The whole thing is pretty simple:

Cut the 4 by 4 (you need 5 legs) to the exact width of the Shelving units. Those legs will be between the plywood INSIDE the space between the shelving units. One in the middle and one in each corner. So the weight of the mattress and the people sleeping on it will both be on the legs and the shelving units.

You need a total of 4 plywood panels, 2 for the upper panel and 2 for the lower one that rests on the floor.

The upper plywood is in 2 piece linked with a hinge so we can remove the mattress, open one side of the bed and access all that space between the shelving units.

Both upper and lower plywood are simply wrapped in a Black king size sheet and we used wood tacks to fix it.

It really give a great result and a LOT of storage space for everything we don’t use too often like camping stuff. You can put baskets in the shelving units for everything you use more often.

~ Alex, Quebec province

More hacks on IKEAHackers.net
Lego Activity Table
[A.C-DC Project] Arcad Compil DreamCast

The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

38 Responses to EXPEDIT Storage Bed

  1. Anonymous says:

    I Really like the result. That is what we need, under bed storage. But I wish there some more photos. I dont get it how you did. What size of Exprdit did you use?

  2. Anonymous says:

    Could you send pictures without the mattress?

  3. Anonymous says:

    How many Expedit units did you use total? What’s in the back against the wall? Does it provide enough support while you’re sleeping? Would also like to see it without the mattress.

  4. Sassss says:

    I’ve been mentally working out plans for something similar for our girls’ twin beds. Their room is so small and the extra storage might help stave off a war. Lol

  5. Christine says:

    Always happy to see suggestions on how to get more storage space in an attractive way. Thank you for sharing!

  6. Modish says:

    The bedding is gorgeous! I love the black and white look!

  7. Alex says:

    Just saw that my post was published! Thanks for all the great comments! I’ll see If I can post some pictures of it without the mattress and with the top panel opened tonight, I’ve got some stuff to put in there anyways.

  8. Alex says:

    Aright, I don’t think I can update this post myself to add new pictures, but as promised here they are, I posted them on my personal blog. I hope this is what you wanted to see :

    http://writingthecode.blogspot.ca/2012/11/about-week-ago-i-posted-on-ikeahackers.html

  9. Anonymous says:

    Is your bed a queen or full?

  10. Lan says:

    Your bed looks gorgeous. I really love the mattress color and its pattern that has luxurious look. Thank you for sharing. You’re an inspiration.

  11. Anonymous says:

    Do you remember where you purchased the bedding set?? It would go perfect with my ‘Victorian Goth’ themed room!

    • Alex says:

      We’re in Quebec (Canada) and my girlfriend found those in stores called Winners, they usually sell brand new stuff but a season late so always at a great price. Good luck!

  12. Chelsea says:

    Did you attach the plywood on top to anything? Or is it just sitting there?

    Are the shelves attached to anything in any way? If so, how?

    I’m hoping OP still monitors this. :-) I posted on their blog page with the additional pictures with no response.

  13. Alex says:

    OP here
    Sorry for the late response!
    the upper part of the plywood, the part at the head of the bed, is actually attached to the middle and top corners 4×4. The only part of plywood that is only sitting there is the half that can open. The shelves aren’t attached at all but they fit just perfectly there.

    (I posted the answer on my blog too to be sure)

    • Chelsea says:

      Hi Alex,

      Thanks so much for getting back to me! I love your design. Thanks for sharing it on here. I plan on using it after I get my new mattress around February/March. It’s just so hard to find storage beds geared towards adults. I always find children’s ones and they’re not the right size. And the adult ones don’t have that much storage space.

      I have a few more questions. I hope you don’t mind.

      How sturdy is it now that you’ve used if for a couple months? Any movement or sounds?

      What thickness plywood did you use?

      Where did you bind those cube bins that you put in the shelves? I’ve been to a few stores that carry similar ones, and they’re a bit too small. The ones you have seem to fit in there perfectly!

      How well is your mattress staying put? Does it move around much?

      I might think of a few more questions. I just want to be as prepared as possible when we (boyfriend and I) finally build it.

      Thanks again,

      Chelsea

    • Chelsea says:

      Whoops, “bind” is supposed to be “find”.

    • Alex says:

      The mattress doesn’t move at all. Its easy to move when nobody is on it thought.

      The plywood we used is 3/4″ thick.

      The black and white fabric cube bins were available directly at the IKEA store :) They’re made to fit the shelves perfectly.

      The bed is pretty sturdy IMO, it does crack a bit when you get in and out the bed, but I’ve never heard it while lying in bed. Plywood tend to move/curve a bit, depending on moisture, well like wood in general,so this might vary a bit.

      If you build it, just make sure that you cut the 4×4 to a perfect size to fit the shelves between the plywood so the plywood sits perfectly on it, its the main challenge :P As you can see in the additionnal pictures on my blog, we used some metal “footing” (not sure how you call those) that you fix on the 4×4 ends and that allow you to easily fix the plywood to it so you have to considers the thickness of those too when you cut your 4×4.

      Also, I strongly suggest that you buy an hinge that can cover the whole width of the bed where you can lift open the plywood, this way the two separate plywood pieces stay perfectly aligned.

    • Chelsea says:

      Hi Alex,

      I’m glad to hear it’s holding up well!

      I went to the Ikea website and those bins were only available in green, black and pink when I looked. I hope they have white still in store! That’s the color I’m looking for.

      My boyfriend is good at this building stuff, I’ll let him know your recommendations and such. It does look like it would get a bit difficult to get those 4×4 exact with those footing things!

      So you recommend one really long hinge rather than a few smaller ones? I’ll definitely keep that in mind.

      Thanks so much for answering all my questions! I really appreciate it!

    • Alex says:

      Hi Chelsea,

      A simple way to calculate the 4×4 length is to add one footing to each end first, before cutting anything , to see how much it adds, then simply substract this from the length you need (Note: the shelves width is the distance between the plywood)
      So if the two footings add half an inch together, and lets say you need 20 inches then 20 – ½ = 19½ inches.

  14. Chelsea says:

    Wish us luck… we’re going to tackle this this weekend or during this week. We’re getting supplies this weekend.

    Thank again for all you informative replies!

  15. Lynn says:

    Wow, it’s gorgeous. I have storage under my bed, too, but it’s not that good to use. However yours look great and savvy. Thank you for sharing. I’m gonna buy this.

  16. Anonymous says:

    Hello.. wondering how sturdy this is… say for couple that can get pretty “active” from time to time. we are thinking of doing 4 of these all lined up to make “tunnels” under the bed – and something else to make up the extra needed inches at the foot and head. .. covered with plywood between shelves and mattress – and attached to the wall.

  17. Anonymous says:

    I’m preparing to create this bed, but I’m not able to determine whats being used to attach the 4x4s to the plywood. I’ve gone to home depot but cannot find those pieces.. and not sure if they are metal or plastic. Anyone please help.

  18. Angelita Lazaro says:

    I would love to see a picture with the matress off and maybe one of the plywood panels open if posdible

  19. SilverKate says:

    This is beautiful. Can you post your blog address, I am just not seeing it. Thank you.

  20. Evie says:

    Thank you so much!!! I’ve been debating on the “under bed dresser” bed, found this and it’s perfect!!! Used some of the info from the reddit post as well!! Cabinets ordered!!! Over estimating but the whole thing won’t cost over 500$ ( the other is 1500$) you have saved me SO much money that I need for other apartment items!!! Can’t thank you enough for sharing!!! I’ll post u a pick when mine is done if ud like. :) again, thank you so much!!! You rock!! :-p

  21. Ona says:

    Can this be done with Kallax now that Expedit has been discontinued or do you need the 5 shelving units for a queen bed to properly fit?

    • darsparx darsparx says:

      Supposedly it can and I’m half tempted to try I’m just not sure(espiecally since i’m new to this myself). I’d love to see a twin sized version of it though since I can’t and won’t fit a king/queen sized bed in my room at my mom’s for lack of storage…

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • Null
    CoverCouch
    Null
    Null
    Null
    Overlays

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com