Published on November 6th, 2012 | by Jules Yap0
Aspelund bedside table into sink cabinet
Materials: Aspelund bedside table (white), electric jigsaw, paper, pencil, silicon gun
Description:My ensuite bathroom is very small and I was thinking to add a small cabinet to make some room for all my bathroom stuff. So I bought a white Aspelund bedside table at my local IKEA store.
The bedside table didn’t fit well inside the bathroom so I decided to hack it a little bit to place it right under the sink.
Obviously there are many IKEA sink cabinets but none of them were well suited for my sink.
First I disassembled the top layer and the middle (inner) layer of the Aspelund.
I put the top layer just under the sink and cast the sink border (only half) using a pencil.
I did the same with the inner layer.
I mirrored the lines using some paper and duct tape.
I removed the wood using an electric jigsaw.
Then I built back together all the pieces of the Aspelund and placed it under the sink.
I filled the gap between the wood and the sink with some silicon.
~ Gianluca G, Italy