Malm

Published on June 26th, 2012 | by Jules IKEAHacker

16

25% A/V Storage 75% Malm





Materials: MALM 4-drawer chest, white

Description: Malm unit converted into 25% Audio/Video storage, 75% Malm drawer storage.

First, we setup the Malm unit as the directions state. We did not assemble the 4th drawer and instead left the top space open. We visited the Ikea as-is section and purchased a $1.99 as-is piece of white, laminated wood. We cut this to the width of the inside of the Malm unit.

We purchased corner braces, long hinge, magnetic strike, and white, laminate chain at our local hardware store. First, we mounted the corner braces to the inside wall both (L) and (R) side.

Next, we cut the white laminated board to size and mounted it to the angle braces. We cut 2, 6 x 6 squares out of the rear board to fit the cords of the A/V equipment.

Finally, we used the extended hinge to secure the front of the 4th drawer to the laminated white board. This created a hinged access door. Finally, we added the chain to give the door support and the magnetic striker to keep the door closed when we don’t need it open for access. Enjoy :)

~ Rob Reese II, New York, NY

More hacks on IKEAHackers.net
LEGO Dioder Lamp
Besta Expedit computer desk

The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

16 Responses to 25% A/V Storage 75% Malm

  1. Anonymous says:

    This is a pretty bad idea. I’m going to guess you’ve not ran that equipment for very long in that setup?

    That amp is going to kick out some serious heat and you’ve next to no ventilation around the areas that require it.

    I would rearrange or install some fans in the back.

  2. Anonymous says:

    Yeah, that DEFINITELY needs fans – or you may have some fried equipment on your hands.

  3. Anonymous says:

    Especially since that isn’t even a receiver if I am seeing it correctly, it’s an HTPC.

  4. 337 says:

    nah…good idea, slightly off execution. fans, air holes, or less equipment with more space are definitely needed here, as anonymous has said.

  5. Anonymous says:

    you need air holes on each side or back and put a slim profile fan attached to power management plug so it automatically turns on and off with AVR unit.

  6. Anonymous says:

    I am glad to see everyone already said the same thing. Fans. get them naow!

  7. Rob R. says:

    Thanks for the feedback all – I am the original submitter of this and while I did not provide a rear picture, there are 2 server grade, high velocity fans mounted in the rear where the 6 x 6 cutouts were made… One is an intake – the outer exhausts – plenty of ventilation.

  8. Anonymous says:

    Hey OP, why didn’t you include that info about the fans? It is part of the hack, after all. However regardless of the super great fans you have, the components will most likely brick. The vents on the top of each are there for a reason and covering them up with another component defeats their ability to vent. Good luck with that.

    • Rob R. says:

      Without knowing which pieces of equipment are in there, how can you assume the vents are at the top of the equipment? The “AMP” that anonymous claimed would give off serious heat … isn’t even an “AMP” … it’s a home theater PC of which exhausts out the rear and is then picked up and exhausted by the rear fans…. Same with the Phillips unit – it has a rear exhausting fan built into it…. Shall I continue?

    • Anonymous says:

      I never mentioned this “AMP” you are referring too. Not sure where you got that.

  9. Anonymous says:

    To rob r. – cool idea – probably looks sleek! Pity that there’s always someone who has to be negative! – maybe someone who wished they’d thought of it first!

  10. Anonymous says:

    I don’t think that only putting fans to the sides would do the trick. The whole shelf is too stuffed for it to work.

  11. Felix says:

    I really like your idea!

    Of course everyone should think for themselves. Grats for your working setup.

  12. Anonymous says:

    Hi I’m very thankful for this. I have a broken Jonas secretary and knowing about long hinges and the chain thing gives me hope

  13. qvilorio says:

    Hi, very clever setup. Please provide us with pictures from the back, and explain how these fans are turned on. Thank you.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • Null
    Null
    Overlays
    Null
    CoverCouch
    Null

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com