DON'T MISS A HACK. CONNECT WITH ME.

Sunday, May 27, 2012

Antonius plant stand


Materials: Antonius laundry bag stand

Description: I was contemplating to get another Socker plant stand when it occurred to me that the Antonius laundry bag stand is better looking, more stable (its screw feet can be adjusted to the floor), and only one third of the price (5€ for the Antonius, 15€ for the Socker).



I assembled the Antonius according to the instructions, then used a 3mm metal drill bit to drill 4 holes through the 2 "flat" connecting bars on the top. I used the holes to attach a piece of leftover oak panel with 4 wood screws. Apart from treating the wood with oil, the hack only took a couple of minutes, but the result is a very serviceable plat stand that looks rather elegant to boot.

~ Eli, Belgium
Posted by at
Labels: ,

2 comments:

  1. Great hack! Inexpensive and looks great and one I'll be using.

    ReplyDelete

  2. I think someone did this before?

    ReplyDelete

Everyone is free to comment but IKEAHackers.net reserves the right to remove comments that do not contribute constructively to the discussion, contain profanity, personal attacks or seek to promote a personal or unrelated business. SPAM will be deleted.

If you have a Blogger profile, you can click on the SUBSCRIBE BY EMAIL link that will show up below and receive all follow up comments on the hack via email.

Don't have a Blogger profile? Create one for free here so you won't have to be be listed as "anonymous".

Subscribe to: Post Comments (Atom)