Ekby Valter

Published on April 24th, 2012 | by Jules IKEAHacker

9

Laptop Stand, now even cheaper





Materials: EKBY VALTERx2, LYCKAx1, RULLx2

Description: This is an idea from this laptop stand hack. I just find a cheaper way to finish a laptop stand. Just need a screw driver and 4 screws to finish it. It looks cool, too. The total cost is NT$242 (US$8). Very cheap.

~ Hsiping Shih, Taipei, Taiwan

More hacks on IKEAHackers.net
RUNDEL Laundry Bin Smoker
IVAR "Good Old Days" Bookcase

The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

9 Responses to Laptop Stand, now even cheaper

  1. Anonymous says:

    I’m not sure how you did it – do you have more info? I think it’s nice and certainly priced right, but I have no indication of what you did to get there. Thanks!

  2. Hans says:

    @Anonymous above:

    As far as I can see the two “Valter’s” are put next to each other and the pieces from the “Lycka” are the horisontal parts that mount them together

    Very sleek. Good job!

  3. Christopher says:

    I dunno about this….. the way my laptop is made, those brackets to support the bottom of the laptop would cover the most important vent holes.

  4. Marc says:

    you could cut the bits from the lycka to adjust the width so it would block anything. kinda wondering how the lycka is attached to the ekby valter brakets. LH suggested glue, but I think something stronger is in order, no?

  5. VogonPoet says:

    looks like lycka is discontinued? Anyone know of a usable alternative?

  6. Anonymous says:

    I liked this hack so I went to IKEA today to purchase the necessary items. I ended up buying the larger 11″ EKBY VALTER bracket in birch which works well with my 17″ laptop. Since the LYCKA pants hanger is discontinued, I went with the BUMERANG pants hanger which matches the birch brackets perfectly. I used screws to attached the BUMERANG pieces to the brackets as pictured on the post. I decided to countersink the screws for the RULL knobs since I wanted the bottom surface to be flat. However in doing so the RULL knobs would not tighten completely. This was easily solved with the addition of a small washer between the knob and the bracket. It turned out very well and only took me about 20 minutes to complete.

  7. Annabelle Rash says:

    I’m not really sure if you should consider this as cheap. My sister bought a laptop from austin.net.au and she saw cheaper accessories there.

  8. Anonymous says:

    Hi everyone, I made this laptop stand today with a slight variation. I also used two 11″ EKBY VALTER brackets in birch. I bought the small blue LEGITIM chopping board, placed across the diagonal beams as a surface for the laptop to rest on. It was sturdy enough with just the chopping board attached to the brackets. I then used two of the wooden slats (piled on top of each other to make it 2x as thick) from the BUMERANG pants hanger to put a horizontal beam along the bottom on the slanted surface for the bottom of my laptop to rest against. This was better for me than putting two pegs on the bottom because I was able to raise my laptop (lenovo U410) up farther on the slope.
    One piece of advice is to use #4 or #6 type screws. I used #4 1″ screws. First I tried using #10 1″ screws but they were too thick and split the wood piece from the hanger.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • CoverCouch
    Null
    Null
    Null
    Overlays
    Null

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com