Published on April 30th, 2012 | by Jules IKEAHacker18
$10 MALM facelift, huge impact
Materials: MALM four drawer unit, spray adhesive, inexpense engineer print, digital photo
Description: I wanted to customize my boring MALM dresser and after searching for inspiration I found only fabric, wallpaper and wood trims being applied to the dresser fronts. I decided, as a photographer/mom who loves her kids’ faces/decorator obsessed with OVERSIZEness, that I should go with a photo.
I knew that you could get super cheap larger than life black and whites at your local copy shop (staples, office depot). Take in your digital file and ask for an engineer’s print, aka blueprint. I prepared by cropping my image square, 32×32 (your Malm drawer width is 32 inches and the height is 8 inches) since I have the four drawer variety.
You can customize this according to which Malm you have. Once trimmed to four pieces, all 32×8, I applied them to the drawer fronts with 3M spray adhesive. It helps to remove the drawers, and stand them up so you can lie the paper flat. Once you have a sure fit, lift one half of the paper, spray the drawer front under it, and smooth it onto the sprayed drawer. It will stick right away, securing it in place while you repeat with the other half. I did not use Mod Podge as it would probably cause the print to bubble and smear.
The blueprints are said to be “not photo quality” so don’t expect perfection for $3.19, but I don’t think it looks bad at all! Also, when working with your picture, consider where the cuts will go so it is not distracting (cutting thru words or faces for example). Best of luck!!
See more of the Malm makeover.
~ Bridgette Davis
Let’s welcome our new site sponsor, PANYL.
Just as this post is about decorating the front panels of your IKEA furniture, let’s rant a little about the limited surface finishes we have at IKEA – the beech, the birch, the whites, the reds, the browns and even more meh. Well, now, say hello to new possibilities with PANYL, the brainchild of Dan and Tristam. PANYL is a ﬂexible self-adhesive vinyl ﬁlm. Some thing like tape, but without the nasty residue or markings of any kind if you remove it. Unlike tape, it is much ﬁrmer and more rigid, yet malleable enough to be wrapped around gentle contours and edges. Which means, you and I can apply PANYL without any special tools or training.
The most wonderful thing is, PANYL currently stocks 34 patterns, in solid colors, woodgrains, and a handful of specialty ﬁnishes like brushed aluminum. Their finishes fit the Expedit, Bestå Tombo, Framstå and Ekby Järpen but there’s definitely more in the pipeline. Take a look at some of their colourful goodies.
This sky blue finish is just so easy on the eyes, don’t you think? You can also get creative with their finishes. The chevrons on the Expedit is simply amazing. I really want that for mine.
Well, maybe it’s time I update the look of my Expedit. How about you? Go take a look at PANYL.