Hemnes printerhack

Published on February 6th, 2012 | by Jules IKEAHacker

8

Hide-Away Printer Hack





Hide-Away Printer Hack

Materials: Hemnes Dresser, computer printer, hinges

Description: My {sort of} How To Turn a Drawer into a Hide-Away Printer

I started with the Hemnes dresser from Ikea, if you’re familiar with it you know that the drawer fronts are attached with wooden dowels and two metal screws. I removed all the pieces allowing the front panel piece to be free-standing.

Hide-Away Printer Hack

Next, the particle board bottom is grooved into the front panel piece so in order for it to be able to fold down and back up the bottom board couldn’t go into that groove anymore so I just used an x-acto knife and cut it off.

Hide-Away Printer Hack

I used three 2&half” utility hinges and a right hand and left hand support hinge. The 2&half” utility hinges were used along the bottom of the drawer and the inside of the front panel of the drawer. And the left & right support hinges were used to help support the drawer front when open.

For each hinge (one on the far left, on the far right, and in the exact middle) I cut away a part of the bottom so the center of the hinge would sit in that area. Then supporting the front panel laying flat open, I screwed the hinge into place into the bottom drawer piece and the front panel. The bottom particle board is very thin so the screws of the hinge stick out through the bottom. To be sure they didn’t rip back out I used a size 6 washer and bolt on the underside of the drawer to help secure the hinge into place.

Hide-Away Printer Hack
Hide-Away Printer Hack

The last and final step drilling a small hole in the back of the drawer (through the bottom) to feed the power cable through to the printer. Our printer is wireless which I would imagine is crucial in being able to do this for your own project. The only cable leaving our printer is the power cable which made this a convenient project to do.

See more of the hideaway printer.

~ Pamela, of PB&Jstories

More hacks on IKEAHackers.net
Maskros Bling
Dress to impress – walk in closet

The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

8 Responses to Hide-Away Printer Hack

  1. Maria says:

    That is a real good idea, thanks for sharing.
    Hugs
    Maria

  2. Everything “hide-away” are my favourites :)

  3. Katie says:

    I love this idea!!!

  4. Anonymous says:

    Great job! Love your idea & your room.

  5. Laurel says:

    Great idea for hiding those ugly technological necessities.

  6. albinka says:

    This idea not a new idea. I use this method from 1980. So, so.

  7. It’s a pretty good idea, I think. Sure, it’s not new, but it can REALLY help free up some much needed space, and keep all the gadgets and wires out of view.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • CoverCouch
    Null
    Null
    Null
    Overlays

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com