Published on January 21st, 2012 | by Jules IKEAHacker7
Materials: Tertial lamps, aluminum square tube, electric connectors, 1,5 mm wire
Description: I started by reversing the lamp holder position of 6 Tertial lamps so that they could rotate down when the chandelier was in the ceiling. To do that I had to remove de lamp holders, turn them around and reconnect them. The plugs were cut off.
The holes for the lamps are 40 cm apart (10 cm from edges); the lamps were secured in position with 1,5 mm thick wire rings attached to their spokes.
The cables were connected and the chandelier was ready!
~ Ricardo Gonçalves, Porto, Portugal