Lighting chandelier

Published on January 21st, 2012 | by Jules IKEAHacker

8

Tertial Chandelier





Tertial Chandelier

Materials: Tertial lamps, aluminum square tube, electric connectors, 1,5 mm wire

Description: I started by reversing the lamp holder position of 6 Tertial lamps so that they could rotate down when the chandelier was in the ceiling. To do that I had to remove de lamp holders, turn them around and reconnect them. The plugs were cut off.


I used a 5 cm square aluminum tube 140 cm long and made two eyelets for ceiling hanging.

Tertial Chandelier

The holes for the lamps are 40 cm apart (10 cm from edges); the lamps were secured in position with 1,5 mm thick wire rings attached to their spokes.
The cables were connected and the chandelier was ready!

~ Ricardo Gonçalves, Porto, Portugal

More hacks on IKEAHackers.net
As-is goldmine, Part 2: doors are not just for cabinets
RATIONELL drawer mat Lampshade
I’m with you, Jules!
Here’s a high five
No, I don’t want to miss out on any hack. Tell me when the move happens. Here are my details:


The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

8 Responses to Tertial Chandelier

  1. Anonymous says:

    that is totally cool, what is the heat like, and what are the light bulbs you are using?

  2. This was unique lighting in a house. Movable and it can face anywhere.

  3. Jm1.jonas says:

    Great! I would love to make one, it gets really cheap, but my ceilings aren’t that high =/

    Muito bom mesmo, já agora, se eles aguentam-se mais junto ao tecto ou ficam sempre para baixo?

  4. Por si só não fica mais junto ao tecto, teria de apertar mais os parafusos.
    Como está sobre a mesa de jantar a altura é a ideal e a luz muito agradável.

  5. Christian Marstrand Hansen says:

    It’s a great idea. Would you please consider leaving a more detailed description of the construction process and uploading some illustrations and photo close-ups.

    For instance, I’m not sure what is meant by “reversing the lamp holder position” by removing them and reconnecting them or which “plugs were cut off”.

    I think I get the part about the eyelets for ceiling mounting and also the part about the wire rings. Did you have to drill holes in the “spokes” to secure them with the rings?

    Thanks for sharing your idea.
    Christian

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑