Expedit

Published on January 2nd, 2012 | by Jules IKEAHacker

25

Expedit Rolling Kitchen Island





Expedit Rolling Kitchen Island

Materials: EXPEDIT shelving unit, LAGAN countertop, BRANAS baskets

Description: Working with a small footprint kitchen I wanted to build an island that would provide seating, storage and extra counterspace. I saw similiar hacks on this site and was inspired to combine them into one super hack!


First – I assembled the Expedit bookshelf – leaving off the top panel and attaching castors to the bottom panel. Note: it’s important to use good quality rubber castors given how much pushing, pulling and shoving this island endures.

Expedit Rolling Kitchen Island

Second – I cut the Lagan countertop to the desired dimensions (just overhanging the front and back of the shelf and giving a more generous 2.5″ overhang on either side.) Because the Expedit panels are hollow fiberboard I opted to secure the countertop with multiple small brackets. The easiest way to do this is to lay the countertop over the shelf and draw the lines of the shelf panels on the underside of the countertop. Then flip over the countertop and secure the brackets. Flip it back over and secure the brackets to the side and centre panels.

Expedit Rolling Kitchen Island

Third – I cut a backer panel out of 1/8″ thk. primed MDF and secured it to the back of the shelf with finishing nails. This keeps the baskets in place and keeps them from getting kicked from people sitting at the island chairs.

Fourth – I cut the Lagan countertop to create an L-shape and secured to the wall (be sure to find the studs!) with large L-brackets.

Expedit Rolling Kitchen Island

Fifth – I cut a 6″ x 6″ opening in the countertop to sit above the upper right basket. The basket is fit with a garbage bin for easy disposal.

Expedit Rolling Kitchen Island

And there you have it – a kitchen island that gives seating, storage and flexibility!

~ Rebecca, Toronto, Ontario

More hacks on IKEAHackers.net
RE-KIA Table
Broder Entertainment Center for Apartments

The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

25 Responses to Expedit Rolling Kitchen Island

  1. Beate says:

    Great! How is the topping? Any paint?

  2. Anonymous says:

    Way to go Becky! I love it! I especially like the clean lines, the wood effect, the textured look and the multi purpose end result … you are an excellent designer and builder. Thank you for sharing this super neat idea!
    Moonbeam

  3. Helene says:

    This I like very much.
    Cheap, good looking and with very good function :-)

    More of this!

  4. Tyroni says:

    Rebecca,

    What Casters did you use? Any specific Brand?

    Great Job!!

  5. Anonymous says:

    this is the best kitchen island hack ever, I’m so looking forward to duplicating this in my new apartment.

  6. Anonymous says:

    @Tyroni – I don’t remember the brand name but they were industrial grade castors I got at Home Depot. Don’t go for the small plastic version, get the large rubber kind. And space the castors far apart – the Expedit unit is narrow and can tip if you space the castors close together.

    @Beate – I used only mineral oil to treat the wood countertops. It’s food safe and easy to obtain.

    Rebecca

  7. Definitely one of my favorite IKEA hacks. Both functional and great looking. Good Job!

  8. Anonymous says:

    Why have you spent so much money on a mixer, but are then really tight with the island you put it on?

  9. Anonymous says:

    How did you attach the L shape counter to the floor?

  10. Anonymous says:

    @Anonymous – I didn’t attach the island to the floor. The top of the island is secured to the wall and end gable with heavy duty L shaped brackets. The brackets maintain the L shape and uses the side gable as a table leg. Also, this means the island is easily removable with little residual damage.

    Rebecca

  11. Anonymous says:

    Fantastic – thank you SO much for this tutorial. I love how functional it is. The inner part can be rolled away so someone can comfortably sit on that side.

  12. Naantje says:

    @Anonymous: I’m not entirely sure about the poster’s reasons, but those mixers are worth their money. They last a lifetime and are way more powerful than the cheap options out there. For the island, the extra cost generally isn’t justifiable or desirable.

  13. Cheoy Lee says:

    What a great idea! So practical!

  14. zamama says:

    This is so. Awesome! I’ve been wanting a kitchen island for so long, and it has to be non-stationary because of our stupid floor plan. You have given me the answer! Thank you!

  15. Anonymous says:

    I love this! My boyfriend and I are very excited to try our hand at it. I just have two questions: which chairs did you use (or how tall do they have to be) and what did you use to get such a perfect cut for the trash disposal hole? We don’t have any saws, but our apartment is within walking distance to a Home Depot…I wonder if they could cut it for me if I brought it over?

  16. Anonymous says:

    @Anonymous, I used the Glenn bar stools from Ikea – the smaller size (seat height is 26″) The height of the counter is approx 36″. I used a jigsaw to cut the hole in the countertop. I did a plunge cut with the saw and then worked slowly around to create a square. Unless you’re an expert (which I’m not) it’s a tricky cut. You could try taking the countertop to Home Depot, I know they cut lumber you buy from them but I don’t know if they’ll cut lumber not bought at the store. However you could rent the jigsaw tool and do it at home.

    Good luck!!

    Rebecca

  17. hi, great work!!! i love it…in the tutorial you have stated that you cut the lagan to make L-shape countertop…may i know the length and height of the L-shape countertop? thank you…

    • Anonymous says:

      Hi Hafiz,

      The height of the L-counter was 36″ and the length was 4′-2″.

      Hope that helps!
      Rebecca

  18. Anonymous says:

    Do you think l-brackets would be strong enough to make just the top part of this project and throw another piece of lagan on the other end (rather than wall-mount) …to make an all-lagan table (possibly on casters)?

    • Anonymous says:

      It really depends on the length of the top of your table. My island is approximately 4′-2″ long. I would maybe go to 5′-0″ long but any longer than that and I would look at doing a centre gable for extra support. If you want to do the whole thing on casters I would add a base to the table for extra support.

      Does that anwer your question?

      Rebecca

  19. Robert says:

    I looked on the ikea online catalog and could not find Lagan countertops. Maybe I’m confused. Could you clarify what countertop was used for this project? Thanks.

  20. Benjamin says:

    Great! I’m going to replicate this for my home. But,
    1. Has this ever toppled over before?
    2. Did you consider using the castors that were meant for expedit?
    3. Did you consider having the counter top stretch past the expedit so that it resembles more of a table?
    Thanks

  21. MellyTattz MellyTattz says:

    Fantastic hack!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • CoverCouch
    Null
    Null
    Null
    Overlays
    Null

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com