Secondary Storage

Published on January 11th, 2012 | by Jules IKEAHacker

6

As-is goldmine, part 1: built-in bar cabinet





IKEA built-in bar cabinet


Materials:
table saw, nail gun

Description:
Taking our regular route into IKEA (in through the out door, heading right to the As-Is room) my handyman and I were on a mission to include a built-in cabinet into our unfinished dining room, so we could take advantage of the open walls and frame job we (read: he) just completed.

Not only did we find the perfect cabinet for the skinny wall but we scored two extra long cabinet doors that were perfect for the utility closet we just built on the opposite side of the room (hopefully featured in “As-is goldmine, Part 2: doors are not just for cabinets.)

IKEA built-in bar cabinet
IKEA built-in bar cabinet
IKEA built-in bar cabinet
IKEA built-in bar cabinet

The hack involved making the cabinet and shelves the right depth, which was done by running each side through a table saw while it was assembled (basically rolling each side over the blade.) Using the nail gun the shelves were tacked in permanently and the cabinet was hung in the space that was framed specifically for it.

When the room was finally finished/painted we spray painted the door black to match the rest of the decor. It’s so sleek that our first guests oohed and ahhed over it when we opened the cabinet to make them a cocktail.

~ Larissa Mogano, Philadelphia, PA

More hacks on IKEAHackers.net
Tiffany Hacked
Trondheim Dresser Transformation

The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

6 Responses to As-is goldmine, part 1: built-in bar cabinet

  1. This is just as wonderful in person! I was one of the first guests to ooh and ahh!

  2. Danielle says:

    That is the same route I take when entering Ikea – straight to the As-Is section!

  3. Anonymous says:

    Question, how did you finish around the edge where it meets the drywall? I have been looking for a cabinet to do the same thing with, but was figuring on having one with enough border space to put in trim around it. From your pictures it looks like ther is no trim where the frame meets the drywall.

    • Anonymous says:

      The factory finished side of the drywall was hung flush against the side of the cabinet, which was framed out approximately 5/8 ths of an inch out from the studs. This was to accommodate the drywall and a healthy coat of plaster to hide the taped seams. The cabinet base still sticks out of the wall about 1/32 of an inch, to catch the door before it hits the drywall, but it is barely visible as the door conceals it nicely. That slight edge was crucial though in finishing the plastering, as it was a nice straight guide for the spackle blade. I was certainly at an advantage of having the framing exposed, as this might’ve taken a little more time with wall already finished. Hope that helps… Christian

  4. 337 says:

    I did the exact same thing in my basement bathroom – although I had enough space for a 12″ deep one and had the cabinets stick out ~1 1/2″ from the finished wall. I’m planning on trimming them out though. I did just find out though that the kitchen cabinet black-brown door is not an identical match to the Godmorgen black-brown color – silly.

  5. RockSmith says:

    This is a really awesome and beautiful project! I am a community management assistant at Instructables.com. You should consider submitting this as an entry to our Furniture Challenge. We’re giving away a 13-inch Macbook Pro and Dremel sets.

    You can check out the contest here: http://www.instructables.com/contest/furniture/

    I would be happy to feature it on our site if you decide to post the instructions there and help get it noticed among our 13 million visitors. Let me know if you have any questions!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • Null
    Overlays
    Null
    Null
    CoverCouch

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com