Strawberry RAST Play Kitchen

IKEA strawberry Rast play kitchen

Materials: Rast Bedside table, RAM frames, RIBBA frame, SORLI mirrors, even IKEA packaging

Description: Mandate: Create a play kitchen for my daughter for Christmas. Needs to fit space where a kitchen base cabinet is missing.

Labour: Building took 10 hours over 3 days. Countless hours on design/getting stuff.

Cost: Probably more than a shop bought kitchen – but that’s mainly because I had to buy all tools, paints etc.

I’m thrilled at how well it has turned out, considering that I am a complete novice at DIY, the tight time deadline (before Christmas) and the fact I was nursing a painful tooth!

IKEA strawberry Rast play kitchen
IKEA strawberry Rast play kitchen

My heartfelt thanks to IKEA Hackers and play-kitchen-creating mums for all the ideas.

The frame is a RAST bedside table (what else?) I primed, sanded, painted with satin gloss white paint and finally varnished the parts before assembly.

I used a RAM photo frame for the oven door. I painted it a pale pink. I used two flush hinges to attach it to the lower shelf of the RAST table. I tried to screw it in, but after a loooong struggle with the cordless drill, gave up and tried hammering it in. That didn’t work either – hammered all but one of my fingers. Finally glued it using Gorilla All Purpose Superglue.

For the base, I bought a piece of 1/4 inch plywood (should have gone thicker!) – primed and painted along with the RAST sections. I screw-fitted SLUGGA castors to attach the plywood to the RAST “legs”

For the back, I lucked out. I got a RIBBA(?) frame, white finish at the Bargain Corner in IKEA for £2. Screwed it onto the back of the table, inserted some fabric for the “backsplash”. Done.

For the door inset, I used the perspex packaging from last year’s Christmas baubles. (also from IKEA!)

Knobs: Unfinished, screw-fitted knobs bought via eBay, painted white and pink for the hob knobs and oven door knob. Drilled holes and screwed in the knobs.

Hob Burners: Super-glued beaded coasters bought from the supermarket.

Oven Light: Stuck a push LED light on to the roof of the “oven”.

Other accessories:
Stuck a couple of white plastic hooks from the local DIY shop for the oven gloves and apron on one side of the table.

On the other side, stuck a SORLI mirror.

For the trim (just above the oven door), I tried cutting a polystyrene block to size, but that didn’t work – kitchen floor is covered in polystyrene “snow”. My husband helped me saw off a section of a RAM frame (using a craft knife and a bread knife!! I really should have bought a jigsaw!). Primed, painted, superglued on. For the separator between the oven and the shelf on the right, I used a fabric wrapped piece of cardboard – when time permits, will replace with a piece of plywood.

That’s it! Whew.

~ Kipsy, UK