Friday, December 23, 2011
Slim Besta Entertainment Unit
Materials: BESTA, INREDA Pull-out frame, INREDA Shelf insert, SNUDDA, Hole borer drill bit
Description: Main objective was to minimise space of all my entertainment equipment. In previous flat I had metal brackets with cut to size shelves to hold all equipment above TV which worked well on the solid wall.But in new smaller flat, its hollow plasterboard walls & doubtful it could hold all the equipment, so had to be free-standing & I decided to use a Besta Wood effect tall unit.
I measures the levels where the shelves were to go to give breathing room to equipment, done w/o TV at 1st as was planning more units to hang on wall over TV. I then measure evenly the holes to drill out & big enough to feed a plug through. Then it was a case of fitting the equipment in & wire it all up & put in its place.
Few months later I found out this wood effect style had been discontinued & couldn't get any more Besta's to match, I decided to put TV inside the unit on a pull out drawer & have it swivel so I can watch TV from the PC desk. I used a plank of wood to sit TV on, the bearing mechanism of a SNUDDA lazy susan to swivel the TV. All bolted/screwed onto the INREDA Shelf insert sitting in the INREDA Pull-out frame.
The remaining space is for boxes of knick-knacks using PAPPIS cardboard boxes, which 2 fits lovely on each shelf & I was able to fit 4 with room for power supply at the bottom for all the equipment.
Tho it took a few months to get all of it together, it actually was 2 days work & look great next to the other Besta I was able to get & use as a display cabinet. next stage it to back light the units & then it will all be finished.
~ Wolf Simpson, UK