Children

Published on February 14th, 2011 | by Jules IKEAHacker

20

Expedit Baby Closet





Materials: 2×8 and 4×4 Expedit shelves, white

Description: We have very limited space and really small closets in our home, so I came up with an idea to utilize vertical space for baby clothes.

We already had the 2×8 Expedit, so this hack only cost around $40 for the new 4×4 unit, closet rod and rod holders.

We simply put the 4×4 Expedit together leaving out the inner shelving, and installed a closet rod. The 2 units aren’t attached to each other, but I did use those gummy sticky dots for stability in addition to the wall mounting hardware included with the Expedit.

~ Valerie Foster, Phoenix, AZ

More hacks on IKEAHackers.net
Billy Tobo hybrid TV unit
Torked-out Multi-Ribba Technicolour Backlit Feature Frame

The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

20 Responses to Expedit Baby Closet

  1. Paul says:

    I’m in a similar situation and I love this. Would love to see other space saving nursery things you did.

  2. Anonymous says:

    We did this with a similar Ikea shelving unit when my kids were babies. I think I used a tension rod, which was easy but occasionally it fell down. Yours looks more sturdy.
    Good job, attaching your Expedits to the wall. When my daughter was about three years old, she pulled out drawers to “climb” a dresser, and it fell over. It wasn’t that tall, so we hadn’t bothered to attach it to the wall, but my daughter almost had a TV fall on her head! Now I tell everyone with little kids to use the wall attachments.

  3. Sudha says:

    one of the best hacks i have seen :)

  4. Anonymous says:

    It is quite nitpicky, but I just wanted to point out that these are 2×4 and 2×2 Expedits, not 2×8 and 4×4. A 2×8 Expedit would have two alcoves on one side and EIGHT on the other.

    That said! It looks great – very functional :)

  5. Anonymous says:

    Great idea. Please anchor both pieces to your wall so that a toddler doesn’t grab the bookcase to pull him/herself up and pull it over on him/her. We used small metal L-shaped brackets on every bookcase & dresser in the house.

  6. Anonymous says:

    It is clearly stated that it is wall mounted.

  7. lilchinita says:

    What did you use for the closet rod/holders? Where to get them?

  8. Eva says:

    Great idea! I love it!

  9. Anonymous says:

    Totally and completely off topic, but I LOVE that blue stuffed creature in the crib! So cute!

  10. Jynxx says:

    @Anon.

    It looks like that’s an Ugly Doll! You can get them via Land of Nod or, better, Amazon. :)

  11. Anonymous says:

    I like it, looks nice, MAYBE saves space, but surely not time. To put those tiny little things on hangers and then to take them off…I think the same effect with more space saved would have been if little clothes were folded.

  12. Anonymous says:

    Except that folded tiny little things tend to get lost in the pile…perhaps the time taken to hang is equivalent to the time spent searching through the pile to find what one wants?

  13. Anonymous says:

    Sorry, but to the poster before, 2×8 means 2 across and 8 up & down, not 2 on one side and 8 on the other. The op was correct.

    Anyways, love this idea. We are expecting our first child and flats in Taiwan do not have closets so we have been struggling with ideas. This one just might end up in our nursery.

    Also, I love the idea of hanging the clothes, it adds to the decor or the whole baby room.

  14. Anonymous says:

    What a cool idea. Does anyone (author perhaps?) know the other parts used? Namely, the drawers and what looks to be a little cabinet drawer? Are those Ikea stuff you bought, something you made, etc? Would love to have some more details on how you constructed this as I’d replicate it exactly!

  15. Wondering how you mounted the rods inside the expedit unit? We are currently putting a tall expedit cube in our children’s small closet and need to mount 2 rods, securing them on 1 side to the wall and the other to the expedit unit. We tried tension rods, but they keep falling down. I’ve even lightened the load of the hangers but to no avail.

  16. Valerie says:

    @Laurel, Brian, Addison & Liam, I’m sure you have solved your problem by now, but just to answer the question for anyone else who may be wondering – the closet rod was very simple to install. We had the rod itself cut to size at Home Depot, which slid perfectly into the hanging hardware installed on either side. Super inexpensive and quick. I don’t even think we leveled the rod.

    As a side note, here we are approaching 2014 and while the “baby closet” did not follow us in our move to another state, we still have the larger expedit (with another to match), turned horizontally along the back wall of our now toddler’s room, lined with IKEA bins and other toddler treasures. They fit like a glove, everyone thinks they’re built-ins at first glance. Even with a few scratches, these babies are solid workhorses that I imagine we’ll keep through childhood.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • Null
    Overlays
    Null
    Null
    Null
    CoverCouch

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com