DON'T MISS A HACK. CONNECT WITH ME.

Monday, May 31, 2010

Jewelry display tray


Materials: Ribba Frame, Polarvide blanket

Description: My girlfriend keeps on leaving her jewelry on top of our new (and rather expensive :/ ) white lacked piece of furniture. It was time to build a solution to avoid scratches and display jewelry in style. My idea, her perfect execution!

TOTAL cost of the hack: 16 Eur
TIME required: 15 min (at most!)
ITEMS required:

1x RIBBA Picture Frame. There are several sizes and styles, choose the one that fits you best
1x POLARVIDE blanket. Again, there are different sizes.
8x STABILT rubber feet. I think you can get them on IKEA, but this ones are from a hardware store

STEPS

1- Open the picture frame and use the back board to measure the amount of blanket required.


2- Cut a single piece of blanket 2 cm bigger than the back board of the picture frame.


3- Wrap the back of the picture frame with the piece of the blanket and close the frame.


4- Stick some rubber feet so the tray doesn't scratch the surface of your furniture and doesn't slide.


5- Put your day to day jewelry / watches / coins on top and enjoy.

~ pep0, Berlin

3 comments:

  1. Not bad, but just be sure nothing expensive is on this thing. I mean, you don't want to have the good stuff on display around the wrong people . . .

    ReplyDelete
  2. EXCELLENT IDEA!smart you - never thought about using the frames for other needs - got me thinking...

    ReplyDelete

Everyone is free to comment but IKEAHackers.net reserves the right to remove comments that do not contribute constructively to the discussion, contain profanity, personal attacks or seek to promote a personal or unrelated business. SPAM will be deleted.

If you have a Blogger profile, you can click on the SUBSCRIBE BY EMAIL link that will show up below and receive all follow up comments on the hack via email.

Don't have a Blogger profile? Create one for free here so you won't have to be be listed as "anonymous".