Miscellaneous

Published on October 21st, 2009 | by Jules IKEAHacker

5

Patrull Lathe splashguard





Alan finds an easy solution for his lathe splashback.

“I’ve been meaning to make a splashback for my little Taig / Peatol lathe for a while, I was thinking of using some aluminium sheet and folding something up, but hadn’t got around to it. Browsing in Ikea, I saw their Patrull stove / hob guard. It looked about the right size and 1mm Stainless Steel, with safe edges and folded over so it’s very rigid too. It had a central part so it can expand outwards too. Best of all it’s only £10.00 or with an Ikea Family card a smidge over £7.00. Can’t buy the materials for that, and you get a free cup of tea and a handful of wooden coffee stirrers too!

I folded it up and it’s absolutely spot on, it grips to the base of my lathe as if it’s made for it. Holes are in the right place, plus I have a chunk of stainless steel from the central part spare too. Comes with dome nuts and extra brackets which I can adapt and make it into a really sturdy job! It’d work just as well for other small desktop lathes, unimats, micro mills etc too.


It’s magnetic, so I can fit my little magnetic tin storage boxes to it too (Also from Ikea – they normally fix onto their steel white boards). Ikea is a good place to look for items which have other uses around the home and workshop. Great for putting those little allen keys and chuck keys in so you don’t lose them the instant you put them down.


For under a tenner – what a steal, a stainless steel you could say. Great idea for thinking outside the flat pack. Also picked up some Dralla chopping boards – £1.79 for two, great for protecting the bench top when working on any small projects and dirt cheap too, made from Polyethylene with a textured non slip finish, oh and a little Birch cutlery tray, solid wood, finger jointed corners, pre-finished and £6.99!”

More hacks on IKEAHackers.net
Easy soap stand
Lack Drafting Table

The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

5 Responses to Patrull Lathe splashguard

  1. dmann99 says:

    Nice to see Ikea in the workshop. I have a Kullen that fits nicely under my wood lathe. I haven’t hacked it yet but I plan on putting some casters under it in the future.

  2. Manuel says:

    I would be interested how I can get such lathe?

  3. Manuel says:

    and how much it costs?

  4. The lathe is a Taig. Prices vary greatly based on the add-ons you buy.

  5. Alan2525 says:

    The taig lathe is available in the US from http://www.taigtools.com/ or in the UK from http://www.peatol.com/

    I’m always on the lookout for alternative uses for IKEA products!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • Null
    Null
    Overlays
    CoverCouch
    Null
    Null

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com