Work Station

Published on July 16th, 2009 | by Jules IKEAHacker

11

Hacked desk from Mikael drawer units





I will be posting some work station and home office hacks today and tomorrow. This first one is a home office redo from Matt Gusler. It’s a big improvement, with almost double the space and a lot less clutter. The hidden CPU is also way cool. Check in later today for a compact printer rack.

The old office that needs a makeover

Matt explains, “I created this desk from 2 Mikael drawer units, one Vika Furuskog tabletop and 2 boxes of Capita 4″ legs. Additionally, I used 6 replacement drawer pulls, a few mending plates and a couple of L-brackets: all purchased at a hardware store located conveniently next to the Ikea.

As an added feature, I knocked out the drawer bottoms and backs on the left Mikael unit and used it for storing/hiding my PC. Construction was simple. I built the Mikael units and measured where I wanted my desk top to go. I put it in place and secured it with L brackets. Using only the front and sides of the drawers on the left unit, I attached them together using mending plates and a couple of screws. I then used 3 coats of ultra clear polyurethane on the top and edges of the desk. For added protection, I use a Projs Desk Pad protector where my keyboard rests. Even the mouse pad, bamboo and bamboo vase came from Ikea.

The rug is from Ikea too….so are all the shelves. And the trash can. I’m pretty sure the only non-Ikea furniture is the chair! Jeez. Sorry about gritty picture quality, our camera is on it’s way out and needs replacing.”

Tadah!

See more of Matt’s desk job on his blog. Photos can also be found on Flickr in this album.

More hacks on IKEAHackers.net
One for fat candles
Rast bedside table turned printer rack

The Author

Jules IKEAHacker

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

11 Responses to Hacked desk from Mikael drawer units

  1. Kate says:

    Looking good! Well done! Though you should do something about all those cables… If the Mikaels are not as deep as the table top (it kind of looks like they aren’t in those pics), you might be able to mount a rain gutter underneat the table top.

  2. Kathryn says:

    Putting your CPU in an enclosed space like that is a terrible idea, I’m afraid. It produces a ton of heat and needs proper air circulation to prevent overheating, which can degrade performance and even kill the machine.

  3. Anonymous says:

    You could always remove the back of the unit to allow for better air circulation for the PC, maybe adding some brackets for added stability.

    Another neat idea would be to include the bottom of the drawer unit so you could easily slide the tower out of the cabinet if you needed to access it.

    It looks great! nicely done

    -allie

  4. josh@i2pi says:

    Please cease & desist from stealing my designs. I did not open source my design and thus seek royalties by the metric bucketload.

    http://www.flickr.com/photos/jdigittl/3265286101/

  5. Anonymous says:

    Oh please Josh, like none of us have ever thought of it before…

  6. Anonymous says:

    Josh, if you invented the idea of putting a plank of wood ontop of two cabinets, you should have patented it :) I’m thinking of stealing your design too. Looks great!

  7. johnwright says:

    Huge savings on digital media solutions for consumers and professionals at CouponPundits

  8. Anonymous says:

    metric bucketload- i think he was joking….

  9. ColourLab says:

    The idea of the last photo..with the tower is absolutely great!!!!! 10+

  10. Dale says:

    Looks good, but unfortunately dangling cables will ruin any nice setup.

  11. Matt says:

    Holy crap, i didn’t realize this got posted! This is my hack!

    Anyway, I don’t worry about the PC overheating because I knocked out the back of the Mikael file cabinet as well to increase circulation and let the wires through.

    My wife also attached a hidden usb hub to the bottom of the desktop recently for a little more functionality. It’s pretty sweet.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑

  • Null
    Overlays
    Null
    Null
    Null
    CoverCouch

  • Knesting

    Covercouch


  • See the Best of the Best

    See the Best of the Best

Twitter Auto Publish Powered By : XYZScripts.com