She says, "First is our very effective wall-mounted desk/workstation composed of an Effektiv low wall unit add-on and a Summera pull-out keyboard shelf.
The add-on unit was mounted to the wall using heavy duty screws and drywall anchors. To allow for more depth/substance to drill into, Casey had to add two extra strips of cardboard at the holes on the back side of the wall panel. We drilled in the keyboard shelf to the underside of the unit as per the manufacturer's instructions. Our desk chair fits perfectly underneath the keyboard shelf when not in use.
Recently, we saw small 'wood grain' stickers in different finishes that were used to cover up nail holes on a piece of furniture. We will eventually purchase these to cover up the drill holes on the back panel. Our goal was to have a sleek, floating desk that would not look bulky. We knew we wanted to place it in our living room, so we wanted it to still fit in with the relaxed atmosphere, and not appear too 'office-y'. We are very happy with the results!
Next up, for our entry way, we used blue painters tape, and ripped it into shreds. We placed the shreds randomly along the frame of the Luns writing/magnetic board. We then painted over the shreds of tape with black acrylic paint. After the paint had dried, we ripped off the tape, and voila!, we had achieved a sort of graphic looking zebra print to give the frames some zing."
***
There's also Ventrolla, a UK based company specialising in sash windows and renovations. So you know where to go if you need some window work.
That link to MyPhatCrib is no good... Boo.
ReplyDeleteThanks for catching that Nikki. Should be fixed now.
ReplyDeleteI sent an email to u:) did u get it?
ReplyDeleteI think making the table look like it's levitating is just novel and would lose its appeal over time. The "cubby hole" spot for the computer looks unfinished; it should be covered (a hinged drawer front) or at least look like it's part of the table. Then I would say, "Yeah, that's cool!"
ReplyDeleteI'm loving it =]
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteI see the look you're going for the with the mirrors, but I think you might have been better off just decoupaging zebra print paper or covering them in a graphic print contact paper.
ReplyDelete-allie
Well done hack, Kim really managed to perfectly recreate the style she was obviously going for: It really looks like a seat at the hairdresser's.
ReplyDelete