Monday, November 10, 2008

Stark hall unit as a room divider

Galloni Michele from Italy modifies a Stark hall unit to serve as a landing strip divider.


Galloni says, "I modified it by adding an aluminum frame (1.5 x 3 mm) around the unit. The two legs are connected to the bottom via bolts before mounting the legs in place. The frame is connected to the Stark by wood screws, except for the left side, for which I used silicone. The hacked Stark is mounted to the wall by drilling on the right beam three holes shaped like an inverted V and hanging it to three wall screw. For safety reasons I have added an additional support screwed to the wall on top."

Posted by at
Labels:

2 comments:

  1. Clever, cool and modern looking and practical.

    ReplyDelete

  2. This is very creative and pratical.

    ReplyDelete

Everyone is free to comment but IKEAHackers.net reserves the right to remove comments that do not contribute constructively to the discussion, contain profanity, personal attacks or seek to promote a personal or unrelated business. SPAM will be deleted.

If you have a Blogger profile, you can click on the SUBSCRIBE BY EMAIL link that will show up below and receive all follow up comments on the hack via email.

Don't have a Blogger profile? Create one for free here so you won't have to be be listed as "anonymous".

Subscribe to: Post Comments (Atom)