Jule says, "I was given an old student desk which my parents bought at a garage sale before I was born. I never liked it, but it was really functional as a vanity in my bedroom. So, one day it occurred to me that it had the right shape to convert into a piece of mirrored furniture.So, I went to Ikea for mirrors (Lots mirrors: 4 pack for $5) and new knobs (Antik: 2 pack for $5). A few cans of spray paint and some black grout from Home Depot (I was afraid to drill through the mirror, so I left a space for the knobs and filled it with grout.) All totaled it was about a $50 investment. Not including the chair, which I got the Borje chair from the “As Is” department at Ikea for $30 (the white upholstery was dirty, but nothing that a little cleaning didn't resolve.)
I am pleased with the results and even my husband who hates mirrored furniture likes it.
Instructions:
· Remove knobs
· Lightly sand surface (especially the top which was damaged)
· Spray paint with glossy black paint
· Measure and cut mirrors using a mirror cutter (it take a lot of practice – my price includes the 3 tiles I destroyed trying to figure out how to cut it. Then my husband figured it out on the 1st try, so I made him cut the rest.)
· Adhere the mirror with liquid nails made for mirrors
· Fill the seams with black grout
· Put on new hardware
That is astoundingly gorgeous!
ReplyDeletenow this... is a fantastic idea :)
ReplyDeleteI love this! How did you attach the knobs to the mirrors?
ReplyDeleteWow! One of the best things on here.
ReplyDeleteOoh, nifty.
ReplyDeleteB-E-A-Utiful!
ReplyDeleteIt's gorgeous!
ReplyDeleteNice, I like a lot !
ReplyDeletesooo cute!! love it!! I hope you have a great day!! hugs!! Britt :-)
ReplyDeleteman, that's a lot of mirrors!
ReplyDeleteKind of horrible! Augh! But... nice workmanship?
ReplyDeleteI love it!
ReplyDeletewhat a transformation!
ReplyDeletehi, see u @ www.plainreviewpage.com
ReplyDeleteThat is totally cool. WEll done.
ReplyDeleteThat is so tacky I love it!
ReplyDeleteIt's totally not my taste, but it looks like you did a good job and it's a great idea.
ReplyDeleteI would love to try and do this with a malm nightstand or something like that with cleaner lines. (maybe with pieces of mirror that have been etched?)
-allie
For those who want to drill a hole in mirror or plain glass, you just need to keep the glass from rapidly heating up, by running a steady stream of water over the glass or working (slower) underwater. I use a Dremel with a flex-shaft extension to keep the motor away from the water. A tapered diamond wheel point or silicon carbide grinding stone bit works well. Put the glass on a flat piece of wood with the mirror backing facing up. The backing scratches easily so dont place anything on it. Turn the dremel on to full speed and work slowly, kinda tapping at the hole. It should take one or two minutes to grind a hole. Oh and use the water stream to clean off the glass particles, wiping could scratch the backing.
ReplyDeleteI love this! Beautiful.
ReplyDeleteCould you say more about sawing the mirrors? What's the tool you use?
I'd love to attempt something similar but I've never done much crafty stuff before let alone cutting mirrors into pieces.
This comment has been removed by a blog administrator.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteI am the aforementioned husband...and have some answers for how we accomplished some things. To cut the mirror we spent $5 at Home depot on a glass cutter. The biggest trick there is to make ONE cut putting plenty of pressure on the cutter when doing so (oh, and making a straight line). This took some practice, but once we got the technique it was a snap. The cutters directions wanted you to use some special oil (we read online that you could use cooking oil, which we tried)...however, we were never successful with the oil, so I recommend skipping it altogehter once you get the wheel spinning.
ReplyDeleteAs for the knobs, as mentioned, we did not drill through the middle of the glass and instead just left a space inbetween and threaded the knob screw through and grouted around it. I will say it is totally funcitonal but probably not the most secure (but she has never had a problem with it!)
Well done! I'm hoping to do this with a Lack sofa table I've had for years. Thanks!
ReplyDeletei've never seen anything like this before. I really like how the light plays off the mirrors, funky.
ReplyDeletenice one but ghostly at night
ReplyDeleteDoes anyone else out there understand what they meant by "leaving space and filling with grout" for the knobs? I'm so confused! Left space in between where?
ReplyDelete@anon: I am guessing because they used 'tiles' (not full sheets of mirror) the mirror portions used for facing i.e. the drawers; was cut in two separate pieces. Thus, there was a space between each that was grouted and the hole for the handle was drilled in that area. -Brenda-
DeleteOhh, LOVE it!!
ReplyDeletecoolest hack ever :D
very cool!!
ReplyDeletenice job. very pretty.
ReplyDeletewell done! It looks like Jule did a really good job on putting this together.
ReplyDeleteThis is great! nice creativity!
ReplyDeleteHi Jule,
ReplyDeleteI recently stayed at a hotel in Chicago and the main focus in the room was a mirrored desk. Gorgeous as it was, I fell in love. Since that time I have been looking for something similar for my home. Unfortunately, I have not been able to find something comparable in my price range. Now that I have seen the amazing transformation you were able to accomplish I have decided to try to 'mirror' your efforts. My local thrift store has a desk in the style I have been looking for. I have purchased it and plan to start my project this weekend. Wish me luck!
Fantastic...i want to have one in my room too
ReplyDeleteImmediate must try I love this Idea.
ReplyDelete