Secondary Storage 9

Published on May 12th, 2007 | by Jules Yap


Mini web server cabinet

this one’s from robert who tipped me on his web server cabinet project.

“it’s a file & web-server that i have built to fit into an ikea galant effektiv cabinet. i wanted a server in the office but i couldn’t stand to have another computer around buzzing all day long. so that’s how i came up with the idea of hiding the server in one of our ikea galant cabinets we already have in our office.

9 8

it’s not really a hack but i think it’s a pretty cool and unusual way to use a galant cabinet.”

view more of robert’s web server cabinet.

update: the cabinet is an effektiv with older style doors. thanks, narf.

More hacks on
Customizing ikea in an eichler style home
hack your own custom built-in shelving

The Author

Jules Yap

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

4 Responses to Mini web server cabinet

  1. Pete says:

    The back of the cabinet is solid enough to take enough big holes to keep the temperature at sensible levels (without fans). I have 6 devices in a half height cabinet and that is fine. Holes in the back (especially at towards the top) are better, after all, hot air rises and they provide good cable access too.

    Also, I found that one of the old Ikea slatted wooden shoe racks fits inside so I have two ventilated shelves for “stuff”. Mine contains a switch, router, modem, phone base station, NAS etc.

  2. Tim says:

    Heat is can be a killer on computer parts. Even if the CPU is not overheating, Hot Hard Drives Fail.

    I suggest drilling a perforation in the bottom of the cabinet, or better yet, cut a hole and put a fine wire mesh filter over the hole. Then cut a large-ish hole in the top back to allow some natural circulation – heat rises, ya know?

    If you want to go the industrial strength route, you could get a 120MM fan, mount it onto the aforementioned vent hole in the base. To slow the speed of the fan, you could do a 5-volt or 7-volt fan mod to slow the rotation and decrease the fan noise. With the wire mesh filter in place your cabinet will trap less dust.

    I use the wire mesh filters extensively on my home system, and only the really finer grains of dust seem to get through.

    Just my $0.02

  3. Artorios says:

    But doesn’t the cabinet ruin the air circulation and cooling of the server?

  4. Anonymous says:

    I would be really concerned about the lack of ventilation. I would at least cut a large hole in the back of the cabinent and point one of the PC fans in that direction.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑
  • Recommended for you

  • FREE 20 Best IKEA Hacks ebook. Get it here!



    See who won the IKEA Hack & Idea of the Year 2015!
    Voting has ended and we have winners. The The IKEA Idea of 2015 goes to …

  • And we have the winners for the IKEA Hack & Idea of the Year 2014!
    Without further ado, I would like to announce the winners of the IKEA Hack of 2014 as…

  • And the winners are!
    Again, IKEAHackers readers have chosen. It was another fun year picking the best of the best.

  • View all: Posts in chronological order |
    Hacks of the Year | Ideas of the Year

    Support IKEAHackers! Click here to start your Amazon shopping!.