Bedroom misc. 219

Published on April 25th, 2007 | by Contributor


A winning Stolmen floating credenza for the bedroom

I’m loving this media cabinet with matching bedside table from Susan, who blogs at

“I wanted something long, linear, and floating on the wall, definitely not something connected/anchored to the floor. This provides great storage, at a height that is well above the normal dresser, it’s a very comfortable height, it’s close to 36″ off the floor, the top of it. I had countertops left over from a previous project, so used those to put on top of the wardrobe (Stolmen) cabinets. They are mahogany. There are holes at the top of the wardrobes, so a countertop is necessary to hide them.

A winning Stolmen floating credenza for the bedroom

A winning Stolmen floating credenza for the bedroom

Stolmen bedside table

It makes the room look huge, as it is very linear, and it’s simple and useful, especially with the hand cutouts. I also considered stacking one above the other or using other combinations, but ended up with this combination. We love it. These are frequently out of stock, so you have to get them when you see them. They are supported with angle brackets on the inside, attached to studs in the wall. The cable tv box goes under the center wardrobe cabinet.”

Other Stolmen media storage hacks:

- Brett’s Stolmen TV bench

Extra long TV bench

- Hang up your TV with Stolmen poles

Hanging TV stand

- Stolmen media unit for flat TVs

a turtle tank hack
simple cable management on the galant desk

The Author

This post was contributed by a reader. Please see credits at the end of the post. To submit your own hack, please click here.

13 Responses to A winning Stolmen floating credenza for the bedroom

  1. Nisa says:

    Have stolmen drawers (4) 43″@. Would love to hang on wall (float ), but don’t understand how to hang them. Please help!

  2. Charles says:

    The image links are all broken.

  3. sambadoll says:

    I know this is ancient, but in case anyone finds this ages later (like I did!) it does hold DVDs spine up. I use a Stolmen double drawer with cabinet legs to raise it up. I have little book ends inside to hold up the DVDs. There is about an inch and a half clearance with the DVDs. The drawer slides are heavy duty, so you can’t have too many dvds. I do suggest a top, whether countertop or glass, not only to cover the holes, but to distribute the weight of a TV and keep the top of the cabinet from bending over time in the center.

  4. Martina says:

    These are all nice furniture room picture.

  5. Anonymous says:

    it looks more than great !!!! can you give me an article no. ??? and perhaps the price ?!?!?
    i look at it at but i don´t find it !!!?? :( ((

  6. Alda says:

    This looks great. Really want to try it. Thanks for the tip!

  7. Allan says:

    That’s really great.
    I have been trying to figure out if DVD cases will fit in the drawers, spine up (and the drawer will still close).

    If so, it seems like the perfect media storage cabinet.

    What are the internal dimensions of the drawers? (I have only been able to find the external dimensions.)

  8. Stephen says:

    Oh wow. I covet that. Well done.

  9. Hans says:

    Excellent! I love the bright white cabinets with the soft colored wall.

    “Then, we put a 2×3 piece of wood on its side, which lays underneath the cabinet run. The cabinet sits on top of that at the rear.”

    Not sure I understand this. Does the top of each cabinet rest on these angled brackets? Would have to go to Ikea and see how these cabinets are made (especially the back and the inside).

  10. susan says:

    We got a 4 or 5″ 90 degree angle bracket that you get from a hardware store and we used two brackets per drawer. They were mounted at the inside of the cabinet at the top of the cabinet, at the back.

    Then, we put a 2×3 piece of wood on its side, which lays underneath the cabinet run. The cabinet sits on top of that at the rear.

    The angle brackets were positioned, again, at the rear, and there is a part of the Ikea countertop which is solid, at the rear, and is about 1″ solid from the back. We put long screws in that location to connect to the angle brackets and also silicone.

    The angle brackets rest against the wall, and had to be cut through the rear of the Ikea cabinet because there is a 1/2″ recess in the back of the cabinet.

    I just went up and measured from the floor to the front of the cabinet and from the floor to the rear of the cabinet at the wall, to see if there is any sagging in the front, and the measurements were the same.

    I will say that I do not have heavy things in these drawers. Light clothings, papers, things like that. After all, it’s suspended 20″ off the wall, which is quite far. Hope that helps!

  11. Fiona says:

    I love it! Can you give some more info about what you mean by “angle brackets on the inside?” Since these are drawers, I can’t quite figure out how that would work.

  12. I dig it… looks great!

  13. Anonymous says:

    Too cool! I really like how it looks. Hoping to do something like this in my own home someday.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑