Friday, November 17, 2006

can i make a multi-fold room divider out of wardrobe doors?

pax drammen"not unlike vince's room divider hack, i want to use these pax drammen doors, 6 of them ought to do it, to create a room divider.

but here's the rub, i want them to fold up against a wall when they are not in use (most of the time). they will only be brought out to divide the living room in half when we have guests. the 'guest room' will then house the windows though, so i like the idea of it letting light through.

so i want to do something similar to this:

multi-fold door multi-fold door
note how, when you need to, you can fold them against the wall, flat?

where there are a number of doors, they are center mounted and sliding. raydoor's solution for the lowest end is $5800, for 10' x 10' worth of door (4 10'x2'6"), and they need 75 days of lead time. also, if one breaks, it's another custom order.

the problem is threefold:
  1. how do i find hardware that is reliable and sturdy (sliding stuff always breaks, even more so if you add rotation around a single point).
  2. how do i mount it to the pax doors?
  3. the doors are only about 7' tall, so how do i hang it in a 10' space and still leave the ceiling looking nice and open, not dividing the room into two when it's not used?
  4. can i just get the pax stordal put the track on a hinge, and swing it across the apartment, then pull the doors across when i need it? is that too ghetto?
ikea would be a good solution for this not only because of its cheaper price, but its better availability (i don't have to wait 75 days and pay an extra grand for a replacement)." - michael

michael,
the 3 feet gap between ceiling and door is definitely a problem in what you're planning to do. a way could be to attach the top and bottom of the doors to a rod of some kind (curtain rods perhaps) and connect both ends of the rod to the track but that could be tough to do in reality. and perhaps quite ghastly looking. an option is to do a folding screen instead (here's a link for multi-folding door hardware but not sure if they are any good. i think the best bet is still your local hardware store.)

if you're still keen on sliding, vince explains in the comment sections here how he hung the doors using stolmen poles. drilling holes into the pax wardrobe required. you can hang the doors a foot off the floor to balance out the 10' ceiling height.

not sure how your living room is, but if you do have wall space next to the proposed door space, you can push the sliding doors all the way in (something like a pocket door, without the pocket), flushed with the wall, rather than fold them like your original idea.

other softer options would be to use ikea curtains like this or curtain panels on pulleys, so you can draw them away when not in use.

anyone?

4 comments:

  1. If it weren't for the gap I think it would be quite easy. To cover the gap you would have to lower the railing on some kind of structure. I would recommend to have someone with experience in metal works weld this structure to make it really sturdy, these PAX doors are heavy!

    Once you have the railing to hang the doors onto you should look for... (gah, language! no idea what these things are called!!) ...
    Over here if you go into a DIY store you will find combinations of sliders and railings that go together. I know I saw some that allow spinning. If you attach them in the center of the top of the doors and then connect them with belts or ribbons on the side to each other, it should do what you want. Only problem: the doors might swing a bit if moved but they are heavy so it shouldn't be too bad.

    Hope my ramblings make some sense.

    ReplyDelete
  2. Hey Thanks! I'm the one who made this request, and I suspect (gasp) that some things might not be for Ikea... On the other hand, I am totally using the sliding door hack in a different room. Ikea wins again!

    ReplyDelete
  3. I myself tried to use the sliding doors from Ikea for some closet work.
    It was a lot of work, and did not like the rail on the floor on which the doors slide. I also had the same problem with the gap, due to their fixed sizes.
    I returned them and got some sliding doors from modernus.com (http://www.modernus.com). They are fully custom, and they are beautiful. I understand that they are a bit more, but I thought it was worth it for me.

    ReplyDelete
  4. Hey everyone,

    How about attaching casters/wheels to the bottoms of the doors?

    ReplyDelete

Everyone is free to comment but IKEAHackers.net reserves the right to remove comments that do not contribute constructively to the discussion, contain profanity, personal attacks or seek to promote a personal or unrelated business. SPAM will be deleted.

If you have a Blogger profile, you can click on the SUBSCRIBE BY EMAIL link that will show up below and receive all follow up comments on the hack via email.

Don't have a Blogger profile? Create one for free here so you won't have to be be listed as "anonymous".