Media Storage

Published on September 25th, 2006 | by Jules Yap


no lack of creativity in matt’s media storage

matt’s apartment was first a gem of a flickrfind on apartment therapy. i was immediately taken by the media unit – a lack shelving unit with sliding doors. wow! just what i always wanted. then, a commenter (thanks jamie pup!) suggested ikeahacker to him. and the rest, as they say, is a blog story.

view slide show of hack

despite its good looks, the hack is not complicated. just follow matt’s instructions and you could have this beauty in your home too.

tools required:

  • drill
  • small screwdriver
  • hacksaw
  • ikea wrench to dis-assemble

parts required:

  • ikea lack shelving unit
  • two sticks of 1/4″ aluminum U channel at least 70 3/4″ long
  • small and shallow head screws tiny enough to fit into channel
  • two pieces of 1/8″ acrylic or poly door material – matt’s was bought and cut at tap plastics for under $40 – sized 36″wide x 9.5″ high

“i took out all the lack uprights except the center one – which I had to re-drill the center piece and install about 3/8″ back to accommodate the door rails. cut your aluminum rails to size, mine were 70.75″, but make sure and measure yours.

pre-drill screw holes in the channel and lack. i had to drill bigger holes in the channel so the screws were slightly counter-sunk and the doors would slide over them alright.

i also used metal polish on the rails so they had a nice shine. finally, screw the channel in place except for one end… slide the doors in and all the way to the other side and you’ll be able to screw the un-attached rail ends to the lack.

i chose a very cloudy (but still translucent) door and my remotes still work with them shut… not sure if a darker one would work as well, but might be fine.”

if you can’t get enough, click here to view a slide show on matt’s apartment.
[via apartment therapy]

Updated! February 25, 2009
Scott does one too!
He says, “With a six-month old getting into things, we saw the writing on the wall and decided to upgrade our Lack bookshelf, which we’d been using as an entertainment center.  I had already sanded and stained it to a walnut finish, in keeping with our living room. Along with some baskets that hold toys below from Pier One, I used the hack you had up last year, and added sliding doors. Even in Manhattan, finding aluminum u-channel wasn’t that hard – I did have to bring on the subway, though. The store lent me a hacksaw to cut into 2 pieces for transport. We used Tap Plastics for the doors, but had to order some samples before deciding on a color – this added about $20 to our total cost. This was much less than trying to find a new entertainment center, which would have been 3 to 5 times as much, I’m sure.”

All in:
$99 Lack in 2003
$20 for samples (shipped)
$52 for door (shipped)
$10 for u-channel (cut)
$5 for stain (2006)
TOTAL: $186.00
(baskets were $60 from Pier One, though)

I think it came our really well. We use a RF remote, so the only problem was moving the center speaker on top. Much less clutter shows now and my wife likes is more than before!”

See more photos of Scott’s media unit with sliding doors.

More hacks on

make your kid a chalkboard table
country quilt cover for klippan

The Author

Jules Yap

"I am Jules, the engine behind IKEAHackers and the one who keeps this site up and running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our much loved IKEA items".

7 Responses to no lack of creativity in matt’s media storage

  1. Anonymous says:

    hi, please tell how did you paint the lack? a brush? wich kind of paint did you use? thank you

  2. Hanoihancock says:

    I really love this hack! I’m going to try my own with transparent red doors.

    What did you use to cut the finger holes in the doors? They look nice and smooth, but I doubt a hole saw would do such a nice job.

  3. Anonymous says:

    The u channel rail is 1/4″ to accomodate both acrylic panels, one in front of the other (they’re each 1/8″ thick). If you look in the photos of the darker one, you can see that they’re each cut a little wider than the middle, so one will always stay in front of the other, even though they share the same U channel.

  4. WaX says:


    but how the two panel sliding with only one U channel rail ?

    is possible view a photo with more details of panel in the rail ? ( especially in the middle )

    thanks :)

  5. Martina says:

    I love this this matt’s media storage.

  6. Martina says:

    What a matt’s media storage is very stagger.

  7. Martina says:

    This medie storage is very stagger imediately taken by the media unit.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑